LOC question

  • 3
    Participant count
  • Participant list

dirtyunclerandy
10+ year member

CarAudio.com Elite
Audiocontrol Lc6i

It suddenly cut out and will not turn on. I checked the power and remote with a dmm and got .75 on both. What could be the culprit? All connections are secure.

My amp turns on, so I know the remote portion of it is working. Just no power light.

 
I dont use LC6i's at my shop but the last one I did a while ago I recall there being a fuse on the constant and/or accessory, check to make sure your fuse is still good.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

It would also be easy to add an equalizer to have individual rca inputs for all of the channels. A decent one can be had for less than $40...
6
498
Yeah tapping off the 4 gauge is typically fine. However, you need to fuse the smaller wire right by the 4 gauge at 1 amp (or whatever the small...
3
906
Thanks for the link to this video, I've seen this one before but it's not for component speakers which is what I'm going to install and the part...
4
831
You should run all exact matching subwoofers in one singular enclosure and 1 amp or matching amps for the best listening experience for the space...
11
2K
There are a couple that SMD has tested, around $20.00 that should take the wattage from most any HU. If you are tapping into the speaker wires...
3
1K

About this thread

dirtyunclerandy

10+ year member
CarAudio.com Elite
Thread starter
dirtyunclerandy
Joined
Location
Austin, TX
Start date
Participants
Who Replied
Replies
4
Views
997
Last reply date
Last reply from
dirtyunclerandy
Screenshot_20240609-212906.png

Blackout67

    Jun 9, 2024
  • 0
  • 0
Screenshot_20240609-212805.png

Blackout67

    Jun 9, 2024
  • 0
  • 0

New threads

Top