Lanzar VIBE1200D

[DBfan187 5,000+ posts]

you posted it already.

 

[walkychalky 10+ year member]

you posted it already.

oh...i thought u had some of ur own lol

 

[DBfan187 5,000+ posts]

All measurements @ 14 volts unless otherwise specified.

Frequency Response (4-ohm IHF Load 100 Hz Ref. crossover @ highest setting): +1.2 dB, –3 dB @ 288 Hz

L/R channel error max deviation 20 Hz to 20 kHz: N/A

Signal-to-Noise Ratio (Below Rated Output, “A” weighted): -82.4 dB

Distortion at Rated Output @ 60 Hz: 0.8% @ 1200 watts

Output Power (Resistive) (4 ohms @ 60 Hz to 1% THD+N): 469 watts @ 14 volts, 456 watts @ 12.8 volts, 305 watts @ 10.5 volts

Output Power (Resistive) (2 ohms @ 60 Hz to 1% THD+N): 762 watts @ 14 volts, 748 watts @ 12.8 volts, 486 watts @ 10.5 watts

Output Power (Resistive) (1 ohm @ 60 Hz to 1% THD+N): 1262 watts @ 14 volts, 1007 watts @ 12.8 volts, 696 watts @ 10.5volts

Output Power (Reactive) {4-ohm IHF Load @ 60 Hz to 1% THD+N): 484 watts

Output Power (Reactive) (2-ohm IHF Load @ 60 Hz to 1% THD+N): 893 watts

Crosstalk @ rated output, 20 Hz to 20 kHz: N/A

Damping Factor @ 100 Hz: 45

Voltage for Rated Output: 376 mV to 2.9 volts

Idle Current Draw: 1 amp

Current Draw @ 1/3 Maximum Power: 44.7 amps @ 421 watts

Efficiency @ 1/3 Maximum Power: 67%

Power-Up Noise: 41.4 dB SPL

Power-Down Noise: 45.7dB SPL

 

[DBfan187 5,000+ posts]

I did stick it on my oscope with a 1.3ohm resistive load and got 41.3v AC just under clipping. 40Hz 0dB tone. Unfortunatley I don't have a clamp meter.

 

[walkychalky 10+ year member]

I did stick it on my oscope with a 1.3ohm resistive load and got 41.3v AC just under clipping. 40Hz 0dB tone. Unfortunatley I don't have a clamp meter.

can u translate what that would approximate to in watts.....?

 

[DBfan187 5,000+ posts]

http://www.angelfire.com/pa/baconbacon/page2.html

 

[walkychalky 10+ year member]

alright....so can u ship it out monday via fedex?.....if the answer is yes i can send u payment via paypal tonight....just send me an invoice

 

[SAG3 5,000+ posts]

i highly doubt thant amp will even push out 550 watts , that the first amp i ever had and it was straining bad to push 2 jl w3overall i think that amp my be worth about 65-70$

but if you think it good go ahead find out for yourself how much of a waste of money that amp is

u **** too. noobs ****

 

[iagrdshaka 5,000+ posts]

i highly doubt thant amp will even push out 550 watts , that the first amp i ever had and it was straining bad to push 2 jl w3overall i think that amp my be worth about 65-70$

but if you think it good go ahead find out for yourself how much of a waste of money that amp is

You are retarded.