kinda ripped my spoiler mount

[CAT MAN 5,000+ posts]

anyway here are some pics of the actual damage. how would you fix it .i have 48 hours to fix it before a show. any idea is appritiated. silicone has been thought of but i do not think it will hold. my roof is also starting to go //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif

Click to read more...

 

[Kangaroux 5,000+ posts]

JB weld

 

[RangerDangerV2 5,000+ posts]

fiberglass??

 

[CAT MAN 5,000+ posts]

JB weld

wont have time to cure.

fiberglass??

deff wont have time to cure.

 

[RangerDangerV2 5,000+ posts]

fvcking duct tape ftw.

 

[legendndisguise 10+ year member]

Maybe some quick curing epoxy (clear).

 

[CAT MAN 5,000+ posts]

Maybe some quick curing epoxy (clear).

does it come in black? //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif do you have any idea how flexible that stuff is right off hand?

 

[Dirtrider4eva 10+ year member]

My last hatchEs spolier, wana know how I fixed it? Scrap yard swap out, the whole hatch lid.

can't make it pretty in 48hrs unless you can take it off, weld scrap metal over holes, buff and paint.

 

[legendndisguise 10+ year member]

does it come in black? //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif do you have any idea how flexible that stuff is right off hand?

Yeah, there are different colors. Sorry, couldn't tell if your car was either a dark blue or (no offense) a little dirty but black. Flexibility all depends on the epoxy you use, hardening time and application. There are a lot of different types. Sorry I am not more specific.

 

[CAT MAN 5,000+ posts]

Yeah, there are different colors. Sorry, couldn't tell if your car was either a dark blue or (no offense) a little dirty but black. Flexibility all depends on the epoxy you use, hardening time and application. There are a lot of different types. Sorry I am not more specific.

black base blue sparkles and dirty :/

 

[Spldecendant 10+ year member]

Just lift it up and put like a pound of gorilla glue I between it and that will hold

 

[TaylorFade 10+ year member]

Get some of that 5 minute epoxy from the auto parts store. Cures quickly and that stuff dries hard as woodpecker lips.

 

[CAT MAN 5,000+ posts]

Get some of that 5 minute epoxy from the auto parts store. Cures quickly and that stuff dries hard as woodpecker lips.

thanks taylor when i get home tomorrow ill get on it

 

[akheathen Premium Member]

many ways to fix that in 48np. have done entire vehicle customs in a little less. there are hundreds of good epoxies you can use, just have to pick out the proper one for the job. if there is still the mounting piece stuck to the hatch, it is simple as picking the compatible epoxy and prep with scotch brite while prying it apart, and then epoxy it back together. or other etc. key is in the prep and some setting pressure to get it in all the little places. if you want it to hold better than a weld, go with fusor(25000psi) but it's gonna run you $50+ for one little tube.

 

[Imtjnotu 5,000+ posts]

Bondo