Kicker Zx1000.1

[sundownmaalpine 10+ year member]

hey, i need to know the rms and peak power of this amp. i have read several sites were it says 500 rms and 1000 peak.

and others say 1000 rms and 2000 peak.

i will be running at 2ohms or possibly lower. (1 ohm)(havent decided)

i just need the actual specs. before i purchase this amp.

thanks:veryhapp:

Click to read more...

 

[PaulThompson229 10+ year member]

Rms is rated at 1000rms, probably more like 1100rms since theyre underrated, peak power means nothing, ignore it. And I wouldn't reccomend running that amp at 1 ohm unless you have good electrical or you will fry it.

 

[sundownmaalpine 10+ year member]

ok, well its going on two alpine type r 1222d wired at 2ohms on the one channel. should that hit preety hard?

 

[PaulThompson229 10+ year member]

Yes that will work fine, wire the subs like diagram 2 on this page.

http://www.rockfordfosgate.com/rftech/woofer_wizard.asp?submitted=true&woofer_qty=2&woofer_imp=3

 

[MTX520 10+ year member]

ok, well its going on two alpine type r 1222d wired at 2ohms on the one channel. should that hit preety hard?

sure they will

 

[sundownmaalpine 10+ year member]

i am. umm do i jump the wire from the terminals to get it like that?

 

[sundownmaalpine 10+ year member]

i am. umm do i just jump wire from terminal to terminal. (from hot to hot)

 

[02xblazer 10+ year member]

hey, i need to know the rms and peak power of this amp. i have read several sites were it says 500 rms and 1000 peak.and others say 1000 rms and 2000 peak.

i will be running at 2ohms or possibly lower. (1 ohm)(havent decided)

i just need the actual specs. before i purchase this amp.

thanks:veryhapp:

mine is 1156 at 2 ohms