hey i came back after football practice and i powered on my jeep, but as i played a song i couldnt hear any basss. so i went back to the amp, which was sitting on the inside fender of my jeep in the rear, and saw that the red light would blink every 4 seconds or so. i could see it had some water on the cover of the amp, more like drops of water, and i shut the jeep off, removed the NEG battery cable and disconnected the amp. i brought it in and opened the bottom of the amp to see if water had gotten in but i could see or feel any moisture. any suggestions on whats goin on? what i can do? im leaving it in warm place right now just in case it needs to dry.