Just received this amp... is it any good....suggestions...

[icwe2 10+ year member]

Soundstorm Sta212 Stealth Mosfet Power Amplifiers (2-channel, 1200 Watts)

* TRI-MODE OPERATION

* BRIDGEABLE

* 2_ STEREO STABLE

* FREQ RESP: 9 HZ50 HZ (3 DB)

* VARIABLE LOW-PASS CROSSOVER: 40 HZ150 HZ

* FIXED HIGH-PASS CROSSOVER: 200 HZ

* VARIABLE BASS BOOST: 0 DB18 DB

* POWER & PROTECTION LED INDICATORS

* ILLUMINATED RED LOGO

* THERMAL, OVERLOAD & SPEAKER SHORT PROTECTION

* LINE & SPEAKER LEVEL INPUTS

* CHROME-PLATED RCA CONNECTORS & TERMINAL SCREWS

* REMOTE SUBWOOFER LEVEL CONTROL

* 600W X 2 MAX @ 2_

* 230W X 2 RMS @ 2_

* 1200W X 1 BRIDGED @ 4_

* DIM: 11L X 11.25W X 3H

not sure if its any good but I got it close to nothing //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif maybe thats why cuz it ***** Im not sure but I was wondering if its any good and how big of wiring ill have to get in my car to push this amp. Right now I have 800 watt rockford wiring would that be enough maybe if i added a capacitor. If I need new wirign I can get that any suggestions for good sub that would be good for this amp?

http://www.stootsi.com/store/item.aspx?item=21182180

Click to read more...

 

[Cabin_Pressure 10+ year member]

meh

 

[icwe2 10+ year member]

I was hoping I wasnt going to here that response but something told me I would haha. Well I am looking at this amp... seem good any suggestions.....like I siad i have 800 watt rockford fosgate wiring.

Pioneer GM-D7400M

800 Watts Max. Power Class-D Mono Amplifier

* Class D amplifier minimizes power waste and heat generation.

* 800 Watts Peak Music Power

* Continuous Power @ 4 ohm: 250W x 1

* Continuous Power @ 2 ohm: 400W x 1

* CEA2006 Specifications:

o 400 Watts x 1, at 2 ohms

o 200 Watts x 1, at 2 ohms

o 80 dBA Signal-to-Noise Ratio (Reference: 1 Watt Output)

* Extra-compact Class D amp circuitry for extra-versatile installation.

* Variable Bass Boost precisely controls audio balance and impact.

* 2 Channel RCA Inputs

* 2 Channel Speaker Level Input

* Hi-Volt (200mV ~ 6.5v) Input Level Control

* Built-in Crossover (40~240Hz, LPF)

* 2 ~ 8 Ohm Load Impedance Capability

* Total Harmonic Distortion 0.03%

* Signal-to-Noise Ratio 100dB

* Dimensions: 8-7/8" x 2-1/4" x 7-7/8"

http://www.onlinecarstereo.com/CarAudio/ProductDetail.aspx?ProductID=19066

 

[moparfan1234]

i wouldnt buy it i wouldnt even take it if you gave it to me. well you got my .02

 

[05fronty 5,000+ posts]

1200 watts for 100 bucks? no

 

[05fronty 5,000+ posts]

op what are you trying to do? what subs?

 

[hornedfrog1985 5,000+ posts]

You can get about 1000 watts on here for 100 dollars sometimes.

 

[bump - N - ugly 10+ year member]

1200 watts if lightning strikes. U will be lucky to get 400 rms. Your rockford is probably rated at 800 rms use it.

 

[draft6969]

it all depends on what your using it for. i have used soundstorm amps and subs with good results. i pulled out my hifonics 1206d to install a soundstorm 2500d and like it better than the hifonics.

 

[dragnix 5,000+ posts]

Pos

 

[icwe2 10+ year member]

ya what about that 800 watt pioneer amp i posted about up there I was just thinking of gettin that instead. Anyone know if this one would be good to get I was thinkin of gettin some jl audio 10s or some alpine e class 10s. tryin to keep the subs at a pretty decent price range

 

[moparfan1234]

1200 watts if lightning strikes. U will be lucky to get 400 rms. Your rockford is probably rated at 800 rms use it.

its rockford wire that he has not an amp. dont worry i read it to fast myself and thought the same thing.