JL Cleansweep outputs two inputs at the same time

[acprkit]

Hi

I just installed a JL Audio Cleansweep in my 2007 Toyota Camry with the stock head unit. The setup is: HU output is wired into the Cleansweep, which is then connected via RCA to an Alpine Mrp-f300 amp, which is connected to all 6 speakers (rear deck, doors, and dash).

Here's the issue: The Cleansweep will only output head unit audio to the front channel. It will also only output aux audio (iPod) to the rear channel. It does this at the same time. Thus, the radio is playing in the front, while the aux is playing in the back.

I have checked the input my plugging it directly into the amp, and all the input channels from the head unit are fine. If I unplug the aux jack from the Cleansweep, it will still only output the radio to the front channel.

I purchased this as an open box, without a volume knob. From what I have read, this shouldn’t affect radio operation.

Thanks for your help

Click to read more...

 

[fasfocus00 5,000+ posts]

should have went with Audiocontrol

 

[vaiboy 10+ year member]

The Cleansweep needs the volume knob to select the source.