JL audio or memphis amps?? help!!

[shaunls1 10+ year member]

oh and would you have any actual spec's on the belle 1300?

 

[BassAddictJ 5,000+ posts]

memphis ams IMO have a very distorted sound more than any other amp I have ever used. I just have a small G1300 jl now an its one of the best i have ever had

okay you obviously **** at setting gains........also the clarity of the input signal determines the clarity of the resulting output. so having a panasonic deck is probably causing half the distortion you hear. no offense but panasonic decks are not exactly known for sq.....the jl amp probably sounded better since it was probably installed correctly.

the bass part is not my main consern i have a few options for that.im going for sq and thats whats important to me.

i think the memphis amp wil be my best bet for what i want and my new cdt mids seem a little underpowered.

thanks for all the help guys.

i have had nothing but amazingness out of my 16-mc3004 which is exactly what is inside your belle (the big belle is a 3004 and a 1000d in one chassis). what skateboardkid recommended is a great idea. bridge the 4ch to run to your components and use deck power for the rear fill. rear fill doesn't need anything more than deck power to do the job. its the front stage that does most of the singing.

 

[BassAddictJ 5,000+ posts]

depending on the exact model of the belle it'll be

75x4 @ 4ohms

1100x1 @ 1 ohms

the 16-mc#### series is rated at 13.8v

the 16-mcd#### and mca#### series are rated at 14.4v

either way they are great amps no matter what.

7,750 post nugga

 

[shaunls1 10+ year member]

ok so will i blow my front comp set with 230wx2?

like i said its a quart pvi 216 comp set with the newer style big tweet and x-overs and CDT Audio EF-6CF mids.

these are the mids i have

http://www.woofersetc.com/index.cfm?fuseaction=product.display&Product_ID=1563