Well, tomorrow I am starting on my enclosure. I was hoping someone here could double check my figures and make sure I was on the right track.
I am building an enclosure for a 12W7 for my Acura RSX-S.
The box measurements are
Width – 18”
Bottom depth – 22”
Top Depth – 18”
Height – 15”
1 inch thick mdf
2.16667 gross volume
with driver displacement it is 2.02667
I am shooting for a tuning of 32 hertz
I thought about using a single 4" Aeroport 14.37 inches long.
With port and driver displacement that should give me 1.92227 cubic feet tuned to 32 hertz
Does this look correct? Anything wrong with this?
