Jeyventura Infinity 4runner with carputer

[jeyventura 10+ year member]

Well i figured ill start the thread the final system im shooting 4 will be this

Acer aspire one based carputer with bluetooth, gps and wifi

Lilliput 7 inch screen in the dash and a 9 inch screen in the rear

Creative sound blaster X-fi with 5.1 channel surround sound

Infinity kappas 42.9i in the front

Infinity 1011t tweeters in the front

Infinity kappas 60.9cs in the rear

4 infinity reference 1252w subs

2 infinity reference 1211a amplifiers

1 infinity reference 7541a

Im not sure about single or dual batteries yet

and a 150 amp alternator i know is not that big but cant afford a bigger one right now

I have most of the stuff already if somebody has a pair of infinity tweeters or a bass knob for reference amps or an alternator for a 4runner let me know ill post pics here soon let me know what you guys think

oHHH here

this is how ive been driving for a week now lol

//content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif

Click to read more...

 

[DB-Audio 10+ year member]

should be nice when its done looking in to doing a carputer myself

 

[jeyventura 10+ year member]

its not hard at all if you do your own sound systems and have some decent computer knowledge you are ready check in mp3car.com they have awesome info there

 

[DS Autosports 10+ year member]

wanna see the finished product. I'm tuned in...

 

[jeyventura 10+ year member]

doing slow but at least doing something.

got home and i needed to to something in the car so i went outside and decided to throw the 0 wire run let me tell you was cold out there.

I took out the passenger seat and some trim pieces by the door decided that was the best way to go with the 0

Ohhh i know my carpet looks horrible actually is not that bad but the some stains i cant take out the previous owner was a car coffee drinker

wire laid down i could not be better

had to cut a little opening for the 0 to come up but it looks nice

trim piece in place

passenger door trim piece back in place

rear door trim piece back in place i did also put the remote turn on wire in the same place.

alright gotta sleep ill see what can i do tomorrow

more to come see ya guys

 

[bhsdriller 10+ year member]

what year 4runner

 

[bhsdriller 10+ year member]

what year 4runner

 

[bhsdriller 10+ year member]

what year 4runner

 

[bhsdriller 10+ year member]

what year 4runner

 

[jeyventura 10+ year member]

2 gen 93

 

[jeyventura 10+ year member]

slowly getting results

i could not find the camera cable but here are some pics of the box build

its not finished yet i just wanted to hear lol and test fit the box inside the car, it was a PITA to get it in there and then has to come out again soo i can put carpet in it

oh well

thats the battery N to chassis and to the block

getting some mdf at home depot

safety first dont want to loose an eye with a chunk of wood and also the resins in the mdf are very toxic

bottom piece

test fitting front of the box

pretty much everything was done with that red jigsaw

 

[plugitin 5,000+ posts]

nice...i love toyotas...

 

[jeyventura 10+ year member]

now it started to look like something

not the best cuts but it should work fine.

Now take it out again . . . . still have to do another 3/4 mdf in the front

by the way its sealed with individual chambers with around 1.20 each

 

[rollinonD's 10+ year member]

what's the cutout for?

 

[yota.coma 10+ year member]

+1^^^