Dmopar74
Member
looking to add some bass for under $400 to my classic car, doesn't need to be earth shattering. Can I do better than this for a pre-made box, sub, amp wiring? Don't want to build a box, I must be getting old lol
What amp would you suggest, I've not bought an amp in 15 yearsOk so here's the thing, the dude that own's Skar screwed some people over back in the day who are respected on this forum, so your not going to get any love for that setup. I wasn't here at the time so I can only speculate. That being said that kit will hit pretty hard and is a pretty dang good deal. Me personally I wouldn't run it because of what these cats here have said. I would do an American Bass XD1222 dual 2 ohm sub, a BBox from amazon and a 1k rms amp from amazon. Will be close to the same.
This is a Brazilian copy, be careful this amp will do 1500rms https://www.amazon.com/dp/B08HCVQH9J/?tag=caraudiocom-20What amp would you suggest, I've not bought an amp in 15 years
I forgot all about these, man these things pound. Buddy at work has this setup with an old punch 500 and it sounds good.Armada Series Dual 12
Description Specifications Size Audio Legion’s ARM2X12D4 is a ported enclosure featuring two 12audiolegion.com
These sound pretty damn good...I bought a set (after after reading some really good things) to run while I figured out what subs I'd finally go with...I was very impressed with mine...my box was about .5cft too small but they were clean sounding and got loud...honestly if I didn't have my heart set on 15's, I'd still be running them...I sold them to my buddy, he's got them on a 1500w nvx, and he's loving them too
That and also hope it doesn't fall apart, Seen this happen first hand.Only thing to look out for on those Skar enclosures is the port. Since the back of the enclosure is angled the port isn't the same width top and bottom on the back portion of the port whereas the rest is ok