is my amp on crack? help please

[Willkas 10+ year member]

so the other day i noticed that my subs werent working. checked the fuses, blown. checked the circuit breaker, burned. dont know how. so today i went and got a new fuse for the breaker, and went ahead and got new fuses for the amp, and every fuse that i put in a couple seconds later would blow.

dont know why again.

also when i tried to figure out what it was i took my ground off, and it was sparking against the chassis, i dont know why, it just was. never did that before.

is it possible that the battery and ground terminals are touching?

i went to a guy and he said it was a bad ground, although i check it and it was fine. nothing. something is definatly wrong. he also said there was the possibility of a fryed amp. this is without him looking at it though. what can i do?

please help, you know when your really pissed that your subs dont work and you cant figure it out? Im there //content.invisioncic.com/y282845/emoticons/crying.gif.ec0ebefe590df0251476573bc49e46d8.gif:crying://content.invisioncic.com/y282845/emoticons/crying.gif.ec0ebefe590df0251476573bc49e46d8.gif

Click to read more...

 

[gunz4me 10+ year member]

Your amp is on crack.... I suggest Methadone to bring it back down to reality!

 

[CadillacMatt 10+ year member]

 

[revrider1 5,000+ posts]

lol

 

[shaneb 10+ year member]

lol. make sure there aren't any tears or pinches in the power wire.

 

[IDSkoT 5,000+ posts]

To OP:

It's a faulty ground or your amp is bad. Find a new place for the ground, sand it nice and smooth, then ground it. If it happens again, your amp is fried.

 

[IDSkoT 5,000+ posts]

lol. make sure there aren't any tears or pinches in the power wire.

This, too. Make sure all of your wire isn't on the fritz.

 

[shakinghorizons]

Sounds like you blew a zener diode, diode, or transistor internally. Doubt it's a ground cause your blowing fuses on the amp and on power.