grimreper912003
5,000+ posts
<- getting a jAy eL 21W8
If your amp is rated at 75w and your using a deck with a low RCA voltage I would use an O-scope. If you don't have one, be super careful
yep....all there is to it.Ugh I know there's an ohm setting so I put it on the speaker wire pos and neg on that setting?
set it to read ohms and connect the leads to each other. the number you get from this will need to be removed from the reading you get on the speakers.Idk what that means but if you don't mind you can explain. Sorry I ask so many questions
during gain setting I set the eq to flat and volume to the highest volume I will ever listen to it.What should my unit volume be during this
shit's going to be different for everything you listen to....this will make it close enough for daily use.I don't usually listen to CDs so the aux in imput would be different then high quality cd no? So wouldn't this mess up the entire process?
for most hu's it is 3/4 of the volumeIdk how I'm supposed to dtermine max volume though. If it's never been tuned right I have no idea what to go for. Probably 25/34 I'm assuming