Inverting subs..

[86yota 10+ year member]

Do you wire the sub backwards also?

Click to read more...

 

[soundstreamer 10+ year member]

no.

unless... you have one sub inverted and one normal sharing a common chamber.

it won't hurt anything if you are running a single sub setup.

 

[Chevyaudio 5,000+ posts]

no.
unless... you have one sub inverted and one normal sharing a common chamber.

it won't hurt anything if you are running a single sub setup.

//content.invisioncic.com/y282845/emoticons/word.gif.64b12e39f936af3b4fff38a1c0bd0244.gif

Thats how ya do it.

 

[86yota 10+ year member]

K thanks I have been wondering about that

 

[Twistid 5,000+ posts]

what if i have one normal and one inverted? the one mounted normally is already wired up normally, so when installing the next sub i would hook the DVC 4 ohm coil pos to pos and neg to neg, but when i connect them to the amp i would connect the 2 pos on the sub to the neg terminal on the amp and the 2 neg on the sub to the pos on the terminal on the amp?

 

[tRiGgEr 5,000+ posts]

That's what he said //content.invisioncic.com/y282845/emoticons/rolleyes.gif.c1fef805e9d1464d377451cd5bc18bfb.gif did you read the thread???

 

[Twistid 5,000+ posts]

who pissed in your cerial today?

 

[tRiGgEr 5,000+ posts]

Ewww I don't eat cereal. Somthing about pouring cow milk over sugar filled wheat that disturbes me.

 

[loserpunk 10+ year member]

if you dont wire it backwards it's going to be out of phase with your components...

no it'll be out of phase with the other sub, unless you're talking about a single sub setup, in that case, the difference is going to be unnoticeable to almost anyone who listens......but you can wire a single sub inverse, it won't hurt anything, but you probably won't get a noticeable gain