Installing second underseat sub

[martinv_357]

Hi guys,

I have a Cerwin Vega VPAS10 installed using a high-level input from my speakers. I would like to install a second VPAS10 and was hoping someone could tell me whether I'm able to tap into the power, remote and speaker wires that are currently in the first sub, or whether I need to repeat the process again?

Thanks in advance.

Click to read more...

 

[Deon1818]

Hi guys,

I have a Cerwin Vega VPAS10 installed using a high-level input from my speakers. I would like to install a second VPAS10 and was hoping someone could tell me whether I'm able to tap into the power, remote and speaker wires that are currently in the first sub, or whether I need to repeat the process again?

Thanks in advance.

Uhhh. Yes.
As long as your power and ground are 8 gauge or larger. Rem and speaker inputs should be fine.

Good luck trying to get the gains set the same as each other shouldn't affect it too much at 200 watts a piece though.

 

[Kickstand Premium Member]

I would personally run a fused splitter for the power wire but that's just me