info on box for 2 xfl 10s

[j_roude89]

Done research and cnt find exact measurements for this style of box. Tried tores calculator with no succes. My box is double baffled center port. Box is 33in long 16in tall and 14in deep. Port is 11in deep 2 and a half in wide 12in tall. Box is tuned to 36hrtz and not successful picking up lows. All help is appreciated thanx!!!!

Click to read more...

 

[garychoffmann 10+ year member]

What exactly are you asking?

 

[j_roude89]

If the box is too small port not right

 

[j_roude89]

Picking up mids great but lows r not garbage but I kno these subs can get low

 

[mylows10 5,000+ posts]

Not enough port would be my guess

 

[shauncox26]

I got 5.75"x12 for adequate port area that will increase ur box size considerably to tune to the same Hz and maintain internal volume.

 

[j_roude89]

Iv heard box is too small have pic on profile. A guy I kno has a bigger box 4cubes I believe and bigger port. Would that be the best bet or could I salvage box?

 

[j_roude89]

Shauncox yea I bought the box already made thinkin about tunning down to around 33 hrtz good idea?

 

[NASTY08IMPALA 5,000+ posts]

Use torres and play with it ..try to get 4 cubes after displacement with 16"port per cube tuned between 32-34

 

[j_roude89]

Iv tried to use that calculator kinda tough for a beginner but like they say try harder

 

[NASTY08IMPALA 5,000+ posts]

Iv tried to use that calculator kinda tough for a beginner but like they say try harder

Its pretty easy once u try it out ...just try to get the tuning .port area correct the rest will just be measurments u can fit..start by punching in the numbers of the box u have now then tweak the port length and width until u get the port area to around 16 per cube also watch ur tuning also as u widen the port tuning will change

 

[j_roude89]

This is an *example* of the other box Custom Slot Ported MDF Enclosure Box for 2 10" Sub Woofers 4 ft 3 Tuned 32Hz | eBay

 

[NASTY08IMPALA 5,000+ posts]

This is an *example* of the other box Custom Slot Ported MDF Enclosure Box for 2 10" Sub Woofers 4 ft 3 Tuned 32Hz | eBay

I wouldnt mess with any prefab boxes to be hinest ..doesnt look horrible but for that miney u can get one designed and build truely custom for those subs amd ur car ...can u or anyone u know build if they had a cut sheet?? There are guys on here who just design boxes

 

[j_roude89]

No im not gettin an ebay box lol that was an example same design though made at a local shop

 

[snyderd758 10+ year member]

Use aero ports there a space saver and make for a much easier box build.