Infinity 1042W, wired at 4 ohm ?

[vorgath 10+ year member]

Any way to wire two DVC's to run at 2 ohm ?

 

[revrider1 5,000+ posts]

If they are dual 2ohm

 

[vorgath 10+ year member]

hmmmm those 1042W's are that way, right ?

 

[revrider1 5,000+ posts]

//content.invisioncic.com/y282845/emoticons/eyebrow.gif.fe2c18d8720fe8c7eaed347b21ea05a5.gif , arent you describing the 1042w sub already? They are dual 4ohm

 

[vorgath 10+ year member]

*L* my bad *L*

thanks

 

[revrider1 5,000+ posts]

Do they even make a dual 2ohm //content.invisioncic.com/y282845/emoticons/eyebrow.gif.fe2c18d8720fe8c7eaed347b21ea05a5.gif .

 

[vorgath 10+ year member]

Considering it's not listed in their wiring option menu, I'd have to say no

 

[revrider1 5,000+ posts]

So you already have the sub, correct. If not I would get something like a 12", it will run off that amp, you will have the power at 2ohms.

 

[vorgath 10+ year member]

Yes, I already have the sub, bought it two weeks ago. And the amp should be in the mail by now, ordered it Thursday night.

 

[revrider1 5,000+ posts]

Alrighty, it will sound good. What kind of vehicle is it going into? What kind of box?

 

[vorgath 10+ year member]

Ported box, 1.75 cubic feet. Infinity's paperwork calls for a single port, 9 inch long, diameter of 3 inches, to have it tuned at 28 Hz. So I decided to run two ports, 8 inch long, 2 inch diameter (in reality they'll be more like 8 1/2 long, since I'm having them flared on both ends)

In the well/trunk area of a '91 Camaro, thirdgen Camaro, right underneath that big glass hatch.

That's where the catch may be, it's very hard to know how it'll sound, since it's not a real enclosed trunk., but I'm putting the box down as low as possible

 

[revrider1 5,000+ posts]

It will sound good in a hatched rear.

 

[vorgath 10+ year member]

Kewl, thanks for all your help

 

[revrider1 5,000+ posts]

No problem. Let me know how it sounds.

 

[vorgath 10+ year member]

Will do *G*.

I have to finish the padding/insulation, before I can put my new carpet in, and then I can do some real measurements.