Imput on these mids?

[BIGTOSH 10+ year member]

DIYCable.com : Intro » Home » Exodus Subwoofers » Just want to know about these and get some ideas on tweeters to run with them. I have a pioneer880 running active and will be using them in my doors. the doors are fully deadened and tweeter mounted above them off axis.

Click to read more...

 

[okiedokie 10+ year member]

Best sounding 7inch I have ever owned.

If you have the room & power to run them, then maybe give them a try.

There is a 5 & 8 coming out around April or may which will be at a lower introduction price.

 

[BIGTOSH 10+ year member]

Best sounding 7inch I have ever owned.If you have the room & power to run them, then maybe give them a try.

There is a 5 & 8 coming out around April or may which will be at a lower introduction price.

How do you have them installed? What kinda power? What tweeters?

 

[RAM_Designs 5,000+ posts]

I have a pair sitting in their shipping box in my truck...they're about a half inch or so deeper than my ID OEM's, so it's going to be hard to get them to fit. I've heard great things though, ciaonzo loves them as well.

 

[okiedokie 10+ year member]

I have a Scion Tc.

I installed them in my doors then i built a ported box & then sealed it up to compare which i liked better.

Pheonix Gold= 125 per side

Eclipse= 65 per side

MB Quarts= 62.5 per side then i bridged the amp so around 250 per side.

JL audio Slash 500/1= 250 per side, even if this amp is underated at 500.

Tweeters i played with are SB Acoustics neo, & some Vifa large format which i really like paired with the Anarchy Mids.

I Cant remember my x-over points.

I'm going buy the 5.1/4 & the 8's when they come out around May.

 

[Theride 10+ year member]

how deep are these things? looks like you would need a very deep door to fit these in?

 

[RAM_Designs 5,000+ posts]

how deep are these things? looks like you would need a very deep door to fit these in?

You definitely need a deep door, they're around 4" deep.

 

[okiedokie 10+ year member]

3.37 depth

 

[Inferno333 10+ year member]

The pdf says they are 3.66" deep.

That's why I never tried to use them in my tC.

I might be trying them in my Trailblazer though. We'll see if I have the depth when it warms up a bit.

 

[okiedokie 10+ year member]

^^^ Here's the pdf

http://www.diycable.com/main/pdf/AnarchyDocs.pdf

Learn how to fabricate your doors.

 

[Cruzer 10+ year member]

Sick excursion/mid bass plus the xbl2 motor allows them to play to 4-5k hz clean