I need help choosing a 10"

[The_Thomas 10+ year member]

So this is the amp I have: http://www.sonicelectronix.com/item_8515_Kenwood+KAC-9103D.html

I need some opinions for what the best 10" sub for this amp would be. It will be a sealed box. I would like to keep it under $200 but I'm open to all suggestions. I'm looking for something that is going to sound clean.

Thanks!

Click to read more...

 

[d-REW 10+ year member]

i have a mint ascendant audio assasian that would also sound nice sealed im looking for 70 shipped sub is 3 weeks old.

 

[hockeytoker 10+ year member]

fi ssd fits in ur price range an its a good sub!

 

[The_Thomas 10+ year member]

Ok, I was looking around some other threads and the Fi SSD sounds perfect for what I want, but I'm kind of a newb at this, which would be better for my amp the D1 or D2?

 

[hockeytoker 10+ year member]

whoo love when ppl use my recommendations //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

if its just one sub ur going to want the D1. if ur going to have 2 u would want the D2 sub.

 

[Bass911 10+ year member]

Maybe the SSD, but I thought they needed 800rms? That Kenwood only does a little over 600@2ohm. I hope you don't believe its putting out 900?

 

[spencer321 10+ year member]

re se's would also fit the bill... i dunno how much i would rely on those power numbers advertised, with 60 amps of fusing and 13.8 volts constant even at 85% efficiency your looking at ~700w... just something to keep in mind.

 

[94Mazda626 10+ year member]

Maybe the SSD, but I thought they needed 800rms? That Kenwood only does a little over 600@2ohm. I hope you don't believe its putting out 900?

It doesn't need 800 watts... it's rated for 800

 

[Louisiana_CRX 5,000+ posts]

A DD 1510dvc would be perfect //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[Bass911 10+ year member]

It might not need 800 in a ported, but IMO a sealed sub needs the rms. I don't know, maybe the Ssd is real efficient? Even when I ran Se's they sounded better with more than 600. OP, if I were you I would get a sub that can reach maximum WANG at 600 watts. You're probably not looking for that since you are going sealed?

 

[46panel 10+ year member]

Since I don't think that amp will really be putting out its rated power, could think about the Audioque SDC2.5 15" for like 160 bucks.

 

[Buck 5,000+ posts]

I would go ported if you want to get the most sound for your money!

 

[amartin_72]

Yeah what vehicle is this

 

[SPLluminator 10+ year member]

RE SE 10". They were on Ebay for 100 not too long ago. They sound good and are cheap.

 

[pawn man 10+ year member]

ia 187