how to get 1ohm stable on amp

[im23pala]

i have a hifonic mono amp and want to wire it down to 1ohm do i have to do positive inside and negative outside or how please tell me how to make my amp read 1ohm

Click to read more...

 

[dye4metal 10+ year member]

type in your subwoofer/woofers

http://www.the12volt.com/caraudio/woofer_configurations.asp

 

[im23pala]

i already know how to wire the sub down to 1 ohm i just need to know how to make the amp read it as 1ohm

 

[andrew2944r 10+ year member]

Is your amp 1 ohm stable and what subs and voice coil config do you have?

 

[Harleyfx69 10+ year member]

you stupid **** go kill yourself now

 

[im23pala]

yes the amp is 1ohm stable and it a re audio sx 15 dvc 2ohm

 

[tsupra98 10+ year member]

you stupid **** go kill yourself now

you need to go pull that bloody tampon out of your *** and calm down.

 

[anj46907 10+ year member]

i already know how to wire the sub down to 1 ohm i just need to know how to make the amp read it as 1ohm

omg. if ure amp is not 1 ohm stable and u wire it down to 1 ohm, ure gonna fock it up. theres not a magic switch on the amp to make it 1 ohm stable. if u wire ure subs down to 1 ohm. then thats the load ure gonna get

 

[funkyab 10+ year member]

true

 

[andrew2944r 10+ year member]

http://www.the12volt.com/caraudio/woofer_configurations.asp?Q=1&I=22

This is how you will wire it from amp to sub this will give you a 1 ohm load

 

[im23pala]

Got It Was Just Confused Thank Everyone

 

[anj46907 10+ year member]

i wonder if i wire my amp a super special way it will get me 2,000 more watts. and then flip that magic db gain switch and hit 200+ db's

 

[nikhcePtcejorP 10+ year member]

take yer sub

take 2 piece of cable bout 2 feet each in lengh

take one of the cables

put one end into one of the (+) of 1 voice coil

take the other end of that cable and stick it into the other (+) of the other voice coil

STOP

Grab the second piece of wire.

Take one end and put it into the (-) of one of the voice coils

take the other end and put it into the other (-) of the other voice coil.

STOP

Take a piece of wire that will be as long as needed to reach from the amp to the sub with a little bit of play

take the ends of the 2 strand cable, put one end in the (+) labeled on the amp, put the other in the (-) labeled on the amp

Remember which one is which.

Now go to the other end of that cable

Take the end that you plugged into (+) on your amp and plug it into any (+) of any voice coil you have on the sub.

Take the end that is (-) and put it into the (-) of the other voice coil.

NOT THE SAME ONE AS WHERE YOU PUT THE (+) CONNECT.

Take a dmm and check to make sure you have a 1 ohm load.

/end