How much is this amp really pushing

[gs300tx 10+ year member]

i guess the Power Acoustik 3000db would be the better option huh

 

[Engine_hp 10+ year member]

i guess the Power Acoustik 3000db would be the better option huh

1) i read that they both put out the same power

2) aleady bought the bamf

 

[jpexpc 10+ year member]

the pa bamf 5500 has 200a fuse dose that mean it will put out 2000rms ? IMO no way //content.invisioncic.com/y282845/emoticons/crazy.gif.c13912c32de98515d3142759a824dae7.gif

It's supposed to have the same board as the Kole Audio KX1-5500. If so, then 2k @ 1 ohm is probably right.

http://www.caraudio.com/forum/showthread.php?t=392879&highlight=Kole+Audio+KX1-5500

http://www.caraudio.com/forum/showthread.php?t=386900&highlight=5500d

 

[MisterGrubbs 5,000+ posts]

The fusing option is easy.

Take the fuse allowance, in this case 120 amps.

Multiply it by the voltage, so assume 13.8v, 14v, whatever you like

Then, multiply it by the estimated amplifiers efficiency. I always assume 75% efficiency as a worst case, which si probably about right for the amplifiers.

At 13.8v, the amp could possibly be in the range of 1250 watts. I think that's a good guesstimate, I'd say, to be safe at least.

 

[Engine_hp 10+ year member]

It's supposed to have the same board as the Kole Audio KX1-5500. If so, then 2k @ 1 ohm is probably right.
http://www.caraudio.com/forum/showthread.php?t=392879&highlight=Kole+Audio+KX1-5500

http://www.caraudio.com/forum/showthread.php?t=386900&highlight=5500d

that would be real good