Sold HIGH END GEAR - DLS A7 CHEAP - Zapco DSP6-SL, Zapco 2 channel

el_chupo_
10+ year member

Senior VIP Member
Rating: 100%
1 0 0
got some gear for sale, things I panned on using until I found a DC650.6 that would work better.

About 3 weeks ago I got side swiped, and the car was in the shop until Wednesday. In that time I found the DC 650, so I dont need this. The plan was to run this with both of these other amps, DLS bridged to a 3 channel amp for mids and sub, the smaller Zapco for tweets

First up is a Zapco DSP6

This is a 6 channel processor that covers full crossovers, time alignment, phase, etc. Full active right here, plus can use your laptop to tune it - or get the DRC controller and do an indash controller.

Info can be found here - unauthorized - http://www.woofersetc.com/index.cfm?fuseaction=product.display&Product_ID=5457

I bought this a couple weeks ago from Customtronic:

http://www.diymobileaudio.com/forum/classifieds/54147-fs-zapco-dsp6.html

100_0381.jpg


100_0387.jpg


And a picture of the scratch on the side/top edge

100_0388.jpg


It is in great shape, but as you can see in his picture, it did not have the small power plug. Steve is sending it to me, so I should have that soon.

I am asking $600 shipped.

--------------------------------------------------------------------------

Next up is a DLS A7 amplifier.

I bought this on ebay a bit back, had some issues with the seller, but it seems to be finally finishing up.

I bought the amp based on his pictures:

23a1_1.jpg


But when I got it, it looked like this:

100_0378.jpg


100_0377.jpg


100_0375.jpg


As you can see, it has extensive scratches on the top. Hidden install, FTW //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

Because of this, I know I am losing some money reselling it. If I were the buyer, and needed it to be seen, I would get a dremmel with a fine polishing stone, or even better would be a small file, and smooth up the top, and have "polished" fin tops...

Anywho, this was purchased authorized, and I have the original receipt showing he paid full price ($1357 for the amplifier) at Canadian Show Car dealership in March of 2008.

I have tested the amplifier, and it is working fine.

Specs are

60x4 @4 ohm and 600x1 @ 1ohm

http://www.dls.se/en/car/prod.html?produkt=en_110

Asking 375 shipped

--------------------------------------------------------------------------

And lastly is a Zapco IForce i-250 (2nd gen - black with Symbalink input)

Stereo, 4 ohms: 2 x 75 Watts

Stereo, 2 ohms: 2 x 125 Watts

Mono, 4 ohms: 1 x 250 Watts

T.H.D. + Noise:

Frequency Response: 10Hz - 25KHz

S/N Ratio: >90dB

Channel Separation: >50dB

Dimensions: 7.625"L x 10.75"W x 2.25"H

Asking 65 Shipped.

I may be interested in trades, dont hesitate to ask, but dont be offended if I say NO. would like:

Zap DC500.1 - - - -no other sub amp, dont need component amps, etc.

Lower powered sub - IDQ, Arc ARC series, DCON, sundown SD1 v2 - etc.

Components/raw drivers High end stuff - no cheap stuff. Looking for DLS, Dyn, Hertz, Rainbow, PRS 720s, etc.

Prefer paypal. Shipping will be by UPS ground. No dibs, unless a non-refundable deposit is made to my paypal account. Will only hold for 1 week if this occurs. feel free to ask what you need.

have a couple refs here from recent sales and one buy:

jblade81

andrios

astrolade

darqnez

pepsican

Also over a dozen at diyma under same username

ebay 100% positive on 89+ transactions -username mr_guitar_man

Thanks

 
trade projector for dls amp
I just got a new TV a couple months ago, so no real need, but just for giggles, what is the model?

What are the total hours

What are the hours on the bulb

What is screen resolution

What are the inputs

**** I really want that A7..... I just bought the A6 and the A4.... If I had the money the signal processor would be taken off your hands guaranteed. Bump for some great stuff!!!!
A solid choice in the A6/A4. The processor is good, one of, if not the best - IMO.

For the price of a h701 and controller you can have this guy, which is a great user interface, etc.

It looks like this:

Screen0506_Small.jpg


With customizable 10 band eq for each chanel, time alignment, graph shows crossovers at top, etc.

 
normal inputs, for computer hook up and then also red yellow and white audio and video. can go up to 1080i prolly 400 hours on bulb. screen can be displayed 8x10 and still look good

 
normal inputs, for computer hook up and then also red yellow and white audio and video. can go up to 1080i prolly 400 hours on bulb. screen can be displayed 8x10 and still look good

Do you have make and model number for the projector so I can look up specs and bulb replacement costs

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

el_chupo_

10+ year member
Senior VIP Member
Thread starter
el_chupo_
Joined
Location
Dallas/Fort worth
Start date
Participants
Who Replied
Replies
26
Views
1,653
Last reply date
Last reply from
el_chupo_
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top