Hifonics Brutus BRX 2000.1?

[Sandin]

Just a temporary system I'm running until I install my sa12s and rf t1500bd.

Just curious on the amp settings I should run.

Level:9v - 0.2v

Phase:0-180

Bass EQ:0-10dB

Sub sonic:15-35Hz

Low pass:35-250Hz

Running it at 2ohms on a t1d412

Click to read more...

 

[NASTY08IMPALA 5,000+ posts]

Just a temporary system I'm running until I install my sa12s and rf t1500bd.Just curious on the amp settings I should run.

Level:9v - 0.2v

Phase:0-180

Bass EQ:0-10dB

Sub sonic:15-35Hz

Low pass:35-250Hz

Running it at 2ohms on a t1d412

Level : will neeed to be adjusted using a scope if u have one or dd1 or at least a dmm..dont just turn it up by ear...for example 3/4 of the way up isnt always 3/4 output ..ur amp might put out clean unclipped signal at half or less all depends on the preout voltage

phase on 0

bass eq on 0

sub sonic on 25

low pass on 80-100

 

[Sandin]

I'm running it at

Level:3v

Phase:0

Bass EQ:3-4

Sonic:32

Low-80

 

[Sandin]

My deck goes to 35 on volume, I have it at 28. Bass -8 - + 8 I have at -4 and bass boost on level 2.

 

[NASTY08IMPALA 5,000+ posts]

My deck goes to 35 on volume, I have it at 28. Bass -8 - + 8 I have at -4 and bass boost on level 2.

Its really hard to tell if ur clipping the signal without a dd1 or a scope..but i wouldnt use any bass boost and turn the sub sonic down a lil

 

[Sandin]

If I don't use a bass boost the sub barely moves, ehh..

I put the sonic down to 25.

Got Bass boost at level 2, bass -4, mid +1, treble +5

 

[NASTY08IMPALA 5,000+ posts]

If I don't use a bass boost the sub barely moves, ehh..I put the sonic down to 25.

Got Bass boost at level 2, bass -4, mid +1, treble +5

Does ur head unit have a seperate sub level from the bass ? If so reset the gain and max the sub level before setting it

 

[Sandin]

No, it doesn't :/

 

[NASTY08IMPALA 5,000+ posts]

No, it doesn't :/

That blows ..maybe look into one that does down the road ...amd one that has a decent eq