Hey my friend gave me punch z's are they good ?

amp

here is a good amp. If you like i can get it for you, not to try to act as a salesman. But it is a decent amp and i think it is what you are looking for. But keep yourself open to suggestions

 
I plugged mine into the wall...

635350_40_full.jpg


 
RMS Power @ 4 Ohms: 180W x 2

THD at 4-Ohm RMS Power: 0.02%

Bridged RMS Power @ 4 Ohms: 460W x 1

Speaker Level Inputs: Yes

Preamp Outputs: Yes

Built-In Crossovers: HP/LP

Bass Boost: 18 dB

Frequency Response: 10-30,000 Hz

Signal to Noise Ratio: 97 dB

Fuse Rating: n/a

820 watts max

about 400 max per channel

i can get it to you for 120 plus shipping

 
amp here is a good amp. If you like i can get it for you, not to try to act as a salesman. But it is a decent amp and i think it is what you are looking for. But keep yourself open to suggestions
//content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif How are you an owner/dealer for audio equipment @ age 17?

 
//content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif How are you an owner/dealer for audio equipment @ age 17?
me and a friend open up a shop and lined up some wholesalers for us. about 1 years worth of planning. Not that hard to set up, just a lot of time.

 
punchz's dont take 450watts.. they take 150watts rms, they get fairly loud for their price inside the car. i had a setup of three of the 12"s and like them, but they werent loud enough for me. power them with a rf 301m, cant be gotten off ebay for like $130.

you run those subs at 450watts they are going to blow, i blew a few when i pushed them with a crummy 300 watts a piece. run them with that 301m wired to 2 ohms and it will sound alright for the subs that they are.

heres what my setup was like.

showphoto.php


 
Well how many watts do you recommend for 2 12's punch z's brand new. IM not lookin to blow my windows or the speakers. Just to have little more noise when my 1 month daughters not in the car.

 
get a profile CA400M and wire the subs to 2 ohms.

Get thezeb.com to beat millionbuy.com 's price of $69.95

It will put out its rated power (320 watts total) and be very inexpensive.

I have a 600M on my wifes re 8'sb and i recommend profile to anyone looking for good cheap power.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

The dirtiest hooker allive gotta smell better than fried Epoxy! (okay, that was a tad bit nasty, but funny nonetheless!)
8
1K
hey
If it is a DVC4 ohm sub.. you can wire it up to a final 8 ohm load to run on that amplifier.. If its a DVC2 ohm sub... you can wire it up to a...
2
1K
Pretty interesting interview/debate
4
550
  • Poll
That strikes me as overboard. We'll probably survive if a thread or two every week comes back from the dead.
18
3K

About this thread

dalifts

Junior Member
Thread starter
dalifts
Joined
Location
pa
Start date
Participants
Who Replied
Replies
12
Views
852
Last reply date
Last reply from
Berry47
Screenshot 2024-05-31 182935.png

Doxquzme

    Jun 15, 2024
  • 0
  • 0
Screenshot 2024-05-31 182324.png

Doxquzme

    Jun 15, 2024
  • 0
  • 0

New threads

Top