Help!!!

[crazy4ozs]

ok so this is my FIRST install ever...it was for a 15" AVA and a PA 1250.1...i did everything right and i doesnt work...but then as i was getting ready to close up for teh night, i was just holding my HU and it popped on...the sub started playing beautifally...but then it shut off...its like it doesnt have constant power...i checked my volts and im sitting at about 12.8 ideling...so im good there...any ideas on what could cause this and how to fix it?

Click to read more...

 

[Fattony911 10+ year member]

what's your amp doing, is it flicking into protect then back into green, check your inline fuse to make sure it's not blown

 

[crazy4ozs]

no its not going into protect...its just going from green to...nothing...

 

[jmanpc 5,000+ posts]

whats the voltage at the amp?

 

[billabongcr 5,000+ posts]

..i did everything right and i doesnt work..

tell us more about this. how did you wire, ohm, impedance, coil config, grounding, inline fuse size, wire guage..etc

maybe we can narrow it down

 

[youngstunna 10+ year member]

good ur **** doesnt work i hope your sub gets blown

 

[crazy4ozs]

tell us more about this. how did you wire, ohm, impedance, coil config, grounding, inline fuse size, wire guage..etc
maybe we can narrow it down

its dual 2, wired into 1 ohm, the wire sizes i used were 1/0 for the power, 4 awg for the ground, inline fuse is just sum old speaker wire...fuse is stinger 100AMP fuse...its like its not getting a constant power source, becuase there was a like 5 minuite period where it just popped on and everything was fine, and now it wont come on to save me...

 

[crazy4ozs]

there was one thing i was a little confused on...where exactly does the "remote wire" go?...to the HU?...and also there were 2 sets of plugs for the RCAs in my amp and only ONE for the substage in my HU...

 

[youngstunna 10+ year member]

so u gonna send my **** or just ignore all my post?