help with my amp/subs?

[amedeuce 10+ year member]

i guess the closest match would be the HZ-124 but with yellow writing

got a digi camera you could post a pic of it for us. What is the amp again, to lazy to reread. Wow that is really lazy.

 

[stones 10+ year member]

You have a possible dual 4ohm woofer then. In this case you need to pull the woofers from their enclosures and wire the coils in series.

like this-

Note how the negative lead is run to the positve on the other coil. This causes the impedance of the sub to double to 8ohms.

Now connect one sub to channel A and the other to channel B then set all you're settings for each channel identical to the other.

This is the same as using two sperate amps to power two seperate subs, you bridge each amp to each sub.

In this configuration you will get 150 watts RMS to each sub, not a huge amount but enough to make them boom and more then they are getting right now..

 

[amedeuce 10+ year member]

http://www.sounddomain.com/shop/wooferwizard.pl?num_of_subs=2&impedance_of_subs=4ohm_dvc&x=120&y=14

Here, for 2 dual 4 ohms subs.

did you hook up the subs in the box? Was there 1 or 2 coils, uh places to hook up speaker wire.

 

[stones 10+ year member]

He's too slow I'm going for another smoke..

You want one one too amedeuce?. //content.invisioncic.com/y282845/emoticons/up2something.gif.dd110ecf3ae4b76050d87598f2f8de7c.gif

 

[amedeuce 10+ year member]

He's too slow I'm going for another smoke..You want one one too amedeuce?. //content.invisioncic.com/y282845/emoticons/up2something.gif.dd110ecf3ae4b76050d87598f2f8de7c.gif

yea, I held off the last one, so now I'm going to go smoke.

 

[stones 10+ year member]

*evil chuckle*

 

[kurtyboy 10+ year member]

i bought the subs in the boxes already. i heard them before i bought em and they were good.

 

[stones 10+ year member]

When you heard them, were they powered off the same amp and wired the same way?, I highly reccomend rewiring them as suggested earlier.

 

[kurtyboy 10+ year member]

yes, they were powered off the same amp, but i don't know if they were wired the same way. you mean, rewire them by bridging? i will try that

 

[stones 10+ year member]

Yes bridge each pair of channels to power each sub, if the subs are DVC 4ohm and are wired for a 2ohm mono load you're amp will cut out because it is not 2ohm stable when bridged, in this case you need to remove the subwoofers and rewire the coils as I showed in the diagram above.

 

[kurtyboy 10+ year member]

alright, thanks for all of the help. i will do that as soon as possible.

i appreciate you being patient with me and my ignorance.