help please

[blazinxpk]

wasup guys im new to this whole car stereo game and i needed some help.

i have a MTX blue thunder pro 502 amp and im searched the whole internet and cant find any specs on it. i was wondering if any of you guys know what they are.

this was used in an old system that i am trying to bring back to life. it was used with 2 10" kickers in a bandpass box, i currently have a jensen amp running the speakers inside that car but i just need some help on the mtx amp part. i will try to find the model number on the subs so you guys can help me wire it.

thanks. any help will be greatly appreciated.

the subs are kicker f10a it says there 8ohm but all over the internet i cant find any 8ohm models only 4ohm ones. are the 8 ohm one that old that i cant even find a trace of them on the net?

Click to read more...

 

[Cas 10+ year member]

most likely its a 500rms 2 channel....

if so....

it might be :

250x2 @ 2ohms

125x2 @ 4ohms

500x1 @ 4ohms STABLE

what fuse ratings does it carry?

 

[blazinxpk]

on the amp right where the fuse is it says 20a and the fuse itself says 20. if thats not what your asking then can you please tell where i can find it. also if those are the specs then how should i wire the subs so that they will sound their best. thanks

 

[blazinxpk]

isnt there anybody that knows about this amp???

 

[mile098 10+ year member]

im not sure if i got it right but if it has a single 20 A fuse seriosly dont think its the one mentioned in the first post...

my overrated oxygen(that pushed maybe 600 rms) has 3x 20 a fuses

 

[Rich B 5,000+ posts]

The MTX Thunder Pro 504 is 50w x 4 (Found here- http://ampguts.realmofexcursion.com/MTX_Blue_Thunder_PRO_504/), so a 502 is probably 50w x 2.