Help Please

[killahoe 10+ year member]

i have a hyphonics amp i belive its a bx 1250 i bought the amp brand new and owend it since december never had any problems the amp is set up at 1 ohm on two twelve inch hx2s but for some reason the amp is just on protect mode and i dont know whats going on i tried to run it at a higher load but still nothing it was working great till now ihope someone can help with some advise thanks

Click to read more...

 

[Polecat 5,000+ posts]

check wiring and make sure you didn't loose a coil on one of the woofers...

 

[FoxPro5 5,000+ posts]

i have a hyphonics amp i belive its a bx 1250 i bought the amp brand new and owend it since december never had any problems the amp is set up at 1 ohm on two twelve inch hx2s but for some reason the amp is just on protect mode and i dont know whats going on i tried to run it at a higher load but still nothing it was working great till now ihope someone can help with some advise thanks

www.dictionary.com //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[Ctminime 10+ year member]

try unplugging the subs from the speaker out see if it comes out of protect they try to run one sub at a time to see (if a bad coil is the culprit) to see witch one is screwed up... simple troubleshooting really...

 

[killahoe 10+ year member]

both subs are fine

 

[dflw_99 10+ year member]

i once had a 1600 watt soundstorm amp burn out and it stayed on protection when i burned out