Allaboutdatbass
Junior Member
Got a more powerful amp kit , turn on my audio and Sub hits with 20% bass and when I put my ear it sound distorted? Please guy let me know straight up what can I do or do I need a new sub ?
Need more info.
Type of sub and amp?
Box type and size?
What cutoff frequency do you have set on the sub?
need actual models of the amp along with how you set the gain and how the whole install including head unit, wiring gauge EVERYTHINGAlpine 12 d4Amp 2500 watt eBay amp
It was all set at zero. I hooked up capacitor worked good for 2 minutes then bass went extremely low and it sound low distortion like if it blew
---------- Post added at 09:58 PM ---------- Previous post was at 09:58 PM ----------
Alpine 12 d4
Amp 2500 watt eBay amp
It was all set at zero. I hooked up capacitor worked good for 2 minutes then bass went extremely low and it sound low distortion like if it blew
Yes I unhooked the capacitor and did the normal set up to the amp , and still thel same. Amp power is on no bassSo after adding a capacitor (which is completely useless btw), it sounded good for a little while then started sounding low and distorted?
20% bass when I turn it up , it goes lower and distorted when I put my ear to subSo you were getting a lot of bass before the cap, then after the cap was added you hardly got any...so now your saying you have absolutely no bass at all?
Ok what's next what should I do ??? That's exactly what happen man . Now dose that mean the sub and amp r done too??Reversed polarity.
Thank u for all . I did hook it up normal and sub still sounds nasty and not too much powerWhat do you mean what now?
Hook your speakers up to the amp as normal.
If your using the amps built in crossover, make sure you didn't accidentally switch it to high pass.Thank u for all . I did hook it up normal and sub still sounds nasty and not too much power
Ok so I'll just turn this all down and give it a shot? Dose it have to do with my speaker wire size?If your using the amps built in crossover, make sure you didn't accidentally switch it to high pass.