Help me out please

[bumpin_8605 10+ year member]

ive posted this before but i didnt get any replies so im gonna do it again. my Profile CL1200 will not come out of protection at all. its been like this for bout a week now. ive un hooked n rehooked it all back up. i was thinkin bout taking the cover n seeing if i see anything but woud tha be a good idea. n the amp is pushing a 10" RE HC @ 2 ohms

Click to read more...

 

[Aurorav8 10+ year member]

I take it you double/triple checked all wiring...and have the proper sized power/ground wires running it all?

 

[bumpin_8605 10+ year member]

yes it is all good n its all the right size

 

[grizzjwill 10+ year member]

You may have to send the amp back if you got a warranty for it.

 

[Aurorav8 10+ year member]

I'd say crack open the case and see if anything seems out of the ordinary.

 

[bumpin_8605 10+ year member]

i dont tink i can send it back unless my friend does cuz hes the one tha bought it from ikesound then i bought it from him like 2 days after he got it

 

[DaBaller504 10+ year member]

Ok, are you sure you got the speakers wired to the correct ohm load. Just check to make sure you wired it correctly.

 

[bumpin_8605 10+ year member]

yes the coils r 2 ohms n i have one coil to each channel on the amp. neg-neg and pos-pos on each channel