HDC3 fail

An acceptable percentage would be less then 5%. So far the HDC3 is 2 for 2 on failures for the AQs that have come into my hands. I will have two more coming in this next week for recones as well. Hoping to see better results. 5% is fair enough isnt it? Most of the recones I do are to change speaker size, change impedance, or power handling. I have yet to have an AQ come in here that hasnt failed (next two failed and are awaiting parts). Is it possible to be coincidence, sure. But I like to be proven wrong instead of just hoping and crossing my fingers that Im just getting all the ones with structural flaws.
So 5% of lets say 2000 (low estimate) is 100 units. Do you have any data to show that 100 units have had the problem YOU are describing? Yes, parts fail, that happens on every woofer out there at same point or another with some level of consistency.

How many AE subs have you built and how many have failed? Like I said, the janked up motor you received is unacceptable and I HIGHLY doubt DJ would have let that sub pass through had he known about it. Why doesn't he do anything to help you now? Well, simply because you are a c*ck. I wouldn't help you either.

Does it matter what DJ does it for? Does he not have the full responsibility to take care of his products and customers? Something not even you can argue?
There wasn't anything to argue in that post besides the fact that somehow you think DJ "doesn't care" about his customers because he wouldn't do anything for YOUR B*TCHY ***. Maybe had you approached him about this, or actually on second thought I would have told someone else to do it, then DJ would have taken care of you.

I rarely see you... talk out of your ***. What deals have I ever recieved? Or are you just going off hearsay of haters. I can make up all the crap about you I could want but Im not that kind of person. ALL products from the challenge were returned to the owners besides a Z15 which jacob had me send to Scott in Indiana as he had paid for it and a RD alpha max that steve had me pay for in return of Jarrett helping me build the boxes for the test. Maybe you should get facts before you accuse someone of something. Also like I said before I had made threads for TC, USamps, and a few others.
So you're telling me you never received good or team pricing on RD, cascade, or any other subs you ran? Bulllllllllllllllllllllllllsh*t! I remember when you had cascade's in the chevette and all you could do was talk about how awesome they were. Where are those subs now? Why aren't you continuing to talk about how great they are? You do the same thing with every company that comes along and gives you a deal. You talk about their great products until you find a better deal somewhere else and you drop them quicker than a girl's ******* on prom night.

Firmly attached to their nuts? I assemble every subwoofer that goes through the building. Would you like to hold me accountable for a cone issue that was outsourced to a company in Chicago, that promised a non-conductive surface five years ago? Go right ahead doesnt bother me one bit, if you wish to blame that issue on me I will accept it. But do you know what the company did, they saw their issue and they fixed it. Sewn leads and non conductive material was added to underside of cone. Something some companies will do and others wont.
Well, aren't you holding DJ accountable for a motor issue that was outsourced to china? How are these problems any different? Is it because he won't give you another motor for free? Why should he after all the hating and bashing you've constantly done? I sure as hell wouldn't give you anything. What good is it gonna do? Hell, I doubt you'd even make a thread stating how great his CS was if he gave you another motor, but whenever a problem arises you are quick to press the "new thread" button.

The fact of the matter is that whole AE cone debacle was a huge screw-up, but as I recall you did nothing but support the companies half-assed efforts to fix the problem, talking about how the silicone didn't affect the cone properties/weight/etc. What a bunch of b.s. that was.

When have I once said I dont care about others opinions. The only difference is there are no intelligent opinions out there, they are all direct bashes at me and have nothing to do with the issue. If Alex or Mike dont like what I say they resort to personal attacks and have absolutly nothing to say about the actually product, which appears like something you may be attempting to?
You said you weren't here to make friends, which I believe is a bunch of crap. Are you here to make enemies? Well, mission accomplished. I actually talked about the issue at hand and gave my opinion on them. Did you skip over that part and just go right to the personal attacks?

I said it was unacceptable to have that motor be sent out. But I also said that this is a rare occurrence, unfortunately this time it fell into the hands of a person who loves to crap on AQ any chance he gets. Had this motor been somewhere else I think the whole situation would have gone down differently.

I have tested for companies as well and any other company will listen, take my advice for what it is, if they dont like it they can say **** it and move on and simply say we will continue to do it our way. This company on the other hand wont even look into its problem. To me that is an issue. With IA i had issues with their stiffening disc which was pointless, they listened to my complaint and explained why they would continue with it, with sundown I had issues with the first phase plug designs which were plastic, look at em now //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif.
How do you know DJ isn't looking into the problem? How do you know this same issue hasn't arisen with all the other manufacturers that have used this sub? Hell, we all know they are made in the same place with the same parts. YOUR issue is that DJ won't take YOUR advice, not that DJ won't look into the problem. You feel the need to preach about how great you are with subs and that every company should implement your ideas, when the fact of the matter is that nobody gives a rat's a**. DJ has avoided your ideas since day one, and that's eaten away at you. Why don't you just let him do his thing? Obviously he's doing something right if they are still in business.

Does that make you feel like a grown man? Funny thing is since this thread I have had over two dozen emails of people asking about subwoofer technologies and if I would help them. They all really hate me, and the four members im building vehicles for, I had done atleast five last year as well. Guess everyone hates me and just trying to steal my deeebeezz
A dozen emails from who exactly? Actual companies or people just asking about woofer design?

Great, a few dozen people can tolerate you long enough for them to get help from you. Congratulations. I wish I had time to be so awesome.

Tommy, few questions for ya. Is this a public forum? Am I entitled to my opinion? Was a product made with flaws that are not acceptable? Do I have the freedom of speech to let people know my experience? Was it left private for the past month, yes. Was any response given, no. From their I figured this would get the point across. And I gotta tell you, and cant be happier to see that someone actually knows of the issue now, even if it is AQ people.
Yes, as I've stated multiple times, these flaws are unacceptable. I had no arguments against that.

The issue I have is coming onto a forum and bashing AQ, saying that they have poor QC and CS. I'm guessing you tried calling AQ before this thread and they shot you down? Feeling a bit salty?

Come at me with personal attacks or talking about me like you actually knew something, when you clearly dont like you kinda did in this forum, you will see the same side at shows. Just my natural reaction, gloves come off. Dont care who you are. I dont go around talking about how DD and Sundown hooked you up to make you talk up their stuff (which they didnt but its a simple example). I bet youd be a little pissed at me specially when you know it aint true but it comes up time and time again with no supporting evidence from all my buddies.
You do the same to the rest of DOA, why is it that we can't do it to you?

I wish DD hooked me up, I DO talk about them enough already. There's the difference, I talk about what I LIKE, not about who gives me the best deal, then moves on when another company moves in. Had I done that, DD would have been long gone and been replaced by no less than 3 other companies who have certainly given me a better deal than DD.

In the end Matt, this argument is getting us nowhere. I'll go back to just agreeing what with Von said earlier and leave it at that.

 
How long until a build log? Your not getting a build log, as I do not care about build logs, once again, its for me, and only me, doesn't affect you whatsoever.
"Cars" Plural.
It can't be a lie if I didn't know. So shut your cawk holster about **** you know nothing about? Still however, you defended her over the internet. Maybe because its his wife?

You will see it soon enough in a build log, Lets see if you have the "Patience" to wait there, cowboy.
So which is it? Build thread or no build thread?

 
In the end Matt, this argument is getting us nowhere. I'll go back to just agreeing what with Von said earlier and leave it at that.
Tis why I choose to point out WHY he says things and not debate what he says. Of course he takes that as a personal attack, but I base those statements off things he's said to me in the past.

The tech stuff gets boring, but I enjoy the pysch part of the discussions...

 
He got himself confused into thinking he had "custom neo BTL 18's" //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif
Lulz....and if the Taco Bell check's do allow him to buy the equipment ....he still won't break a 50! //content.invisioncic.com/y282845/emoticons/rotflol.gif.b453361716769b8110ddefc85ff03cd2.gif

 
Cliff's notes: BB offered me a few free subs when doing the RD infomercial/15" challenge as he told me he was getting to keep the subs from the various vendors. He later retracted that statement as people on the forums were giving him crap about getting free equipment. DJ wouldn't send him a free sub to test so he got salty about that.

Later he sent me a few PM's whining because DJ wouldn't respond to emails he sent with with all these wonderful ideas on how to improve the HDC subs.

So now he's salty and will take any chance he gets to try and make AQ look bad. Again I look at his motives and not what he says as he just rambles on and on. TommyK spelled it out very well, so no need to repeat any of it.

Bottom line if you don't want to run AQ equipment then don't, there are plenty of brands out there to choose from. But do NOT base your decisions on a kid with sand in his ******...

 
Tommy where in your head and would you think I would ever want to be a consultant for AQ? Cause DOA said I should shut up and do it once? That makes you feel that its something id want to do and am butt hurt cause im not. The entire consultant thing is all from DOAs mouth. Never something I would do or want to do EVER. So do yourself a favor and stop bringing it up, it makes you look foolish and I know your a smart guy.

Your right I did skip over the fact that you actually addressed the issue for once because it was followed by dozens of personal attacks. Hmmm wonder why you couldnt have just left it as yeah there were issues, you went about it the wrong way, nothing will be done. Does it make you feel good to talk bad about me cause it sure seems like every ending statement you have is personal attacks.

I do what everyone else does, they have equipment, they find something better, they move on. Do I talk up and support what I use and enjoy? Hell yeah. Every time I have changed equipment I have gained. Would you change from company to company if you saw direct drop in gains? Maybe you wouldnt be so vocal about how much you like or dislike a company but hey thats freedom of speech and im entitled to show my like or dislikes for any company I want. Nothing was EVER given to me for free, sorry if you feel I only stand behind products that do. Only free product I ever received was second skin in which I donated the entire package to Jeremy Weber for Regionals. Beyond that Shok industries gave me a team discount on 20 spools in which TMH, Dee, and Geoff received all of it, I had one foot in my name. But did I still push those companies? Yes of course. You seem to have it in your head that I am only in this for myself, this is a hobby to me and one of many of mine. I dont need deals and anything handed to me. I work for what I have, do you think id be working two full time jobs for the past five summers and a full time during school, when I get free equipment? If only you knew the facts.

 
The hdc original was good, had good softparts. Hdc3 is garbage.
/thread
Used to run HD's and have been using HD3's for the past 2+ years. Sound good, take a beating, and put up good numbers. Don't see the garbage in that...

You seem to like to talk out your *** /thread

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

bumpin buick

5,000+ posts
Science is everything
Thread starter
bumpin buick
Joined
Location
Appleton, Wisconsin
Start date
Participants
Who Replied
Replies
622
Views
50,090
Last reply date
Last reply from
Lakota
20260423_214720.jpg

BP1Fanatic

    May 14, 2026
  • 0
  • 0
20260419_124349.jpg

BP1Fanatic

    May 14, 2026
  • 0
  • 0

New threads

Top