Grand Cherokee speaker help

[hooppro 10+ year member]

Ok this question is for anyone whose done an install on a 92-96 or somewhere in there Grand Cherokee. 3 ???S:

1. is there a good area to run 1/0 gauge through the firewall on the passenger side ccause i am about to break out the drill...

2. i need to put in spacers for my cdt cl-6 and cl-6x speakers...is there enough room after adding 3/4" mdf spacers between the front of the speaker and the door panels or do i need to cut the door???

3. lastly...when takin out the stock speakers i noticed that there was no barrier between the back of the speaker and the inside of the door. so basically rain water could run down the window and drip directly onto the speaker which looks to be the cause of one of them blowing and there paper cones seem to be warped...these seems to be a really bad design...what shoul i use to cover the back of my speaker so it does not get wet??? (this is a big concern since im from the sunny state of washington)

thanks for your time

Click to read more...

 

[hooppro 10+ year member]

ok im an idiot scratch the last ?...im just gonna put in some baffles dont know why i didnt think of that earlier...its too late

 

[supa_c 5,000+ posts]

put 1/2" or 3/4" baffles and make a barrier for the rain water. Like some hard plastic or MDF with some enamel on it.

MFD swells when moisture contacts it.

 

[DBfan187 5,000+ posts]

I think there's a hole under beneath passenger seat, under the car. Covered with an aluminum plug. Beat it out with a hammer. VIOLA! Wire fits.//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif