Getting a center console box. What size aero(s) and which way to face them?

[Plottin4success 10+ year member]

Well. I'm about to buy a center console box for my truck. Its 2.7 cubes sealed before displacement. I'm just gonna cut a hole in it for an aero, or two. I dont think a single 4" aero would be enough, but would 2 3" aeros be enough? Also, the sub is already facing back. Would it be better to face the port forward or up? Those are pretty much my only two options to face the port.

If one 4" aero is enough, then it needs to be roughly 10.3" for a tuning of 32hz.

Two 3" ports would need to be 13.68" for 32hz.

Click to read more...

 

[RAM_Designs 5,000+ posts]

What sub are you using? A single 12"er I assume?

 

[Plottin4success 10+ year member]

Oh yeah. A single 12" from ssackett off of a DSC 2000 @ 1 0hm..

Plans changed though. Box is gonna be 2.0 cubes, so a single 4" should be fine. I just would like to know about the port placement. The sub will be facing the rear wall of my truck, so I guess you could say it will have a loading wall.

 

[winkychevelle 10+ year member]

i have my dd 2510 facing up next to the driver with a 4inch port forward and for 1.27 cubes at 40hz on 350 watts its pretty **** decent i just need to up the box size a bit and put a bit more power to it, but its pretty **** loud for one ten