Gaint settings brigded

[TheeyaN 10+ year member]

Hi everybody =))) This here is my amp http://ampguts.realmofexcursion.com/MB_Quart_RAA2400/

I am wondering.. When setting gains with my DMM,do i use equation for the ''complete power'' 800rms

or i use the power of one chanel 200 rms?

Click to read more...

 

[BumpinTypeR 10+ year member]

if you are bridging then you would do it for 800RMS i believe

 

[TheeyaN 10+ year member]

BUMP

Anybody else?

 

[dman4486 5,000+ posts]

you use what the amp will be putting out. so ITC you will calculate for 800 @ 4ohm

 

[dman4486 5,000+ posts]

56.57vac

 

[TheeyaN 10+ year member]

Tnx mate.. I remember reading somewhere when bridged use one chanel,but i think i didnt undrestand good..

I think that they were saying,when using both chanels use the equation only for one chanel,and the equation is the same for the second chanel..

OK so 56.57 V ac

One more question,should i use the COMPLETE 800rms,what happend if the amp doesnt have real 800? I think it should have even more becouse its made by Rockford Fosgate and all of RF amp have more than they r rated (plus i have a clip lamp) =)