SOLD FS: Headunits, Amps, Crossovers

2002XLT
5,000+ posts

Thats right bishes...
7,140
4
H-Town, TX
Read the following for prices and pics/descriptions. All sales are final unless its proven that whats stated in this thread is wrong, check my refs you wont get screwed. All prices will be OBO and if you want more then one i can cut a bigger deal. Whats pictured is what comes with units, no manuals, paperwork, etc. Ill be adding more to this thread.

All items are presumed used unless noted, may have signs of this use.

Sony CDX-C5000X 35 Shipped

Works 100%, little stiff when opening and closing the faceplate to get the CD, you have to help it open as well.

comes with harness

339400834.jpg


339400845.jpg


Kenwood KDC-128 - 50 Shipped

works 100%, comes with harness

339400871.jpg


Panasonic CQ-C7301U 60 shipped

Missing volume knob but it works fine, light scratching. 100% functioning. comes with harness

339400875.jpg


339400880.jpg


JVC KD-S580 - 40 Shipped

works perfectly, good shape. comes with harness

339400885.jpg


Sony CDX-SW200 - 40 Shipped

Works perfectly. has harness

339400896.jpg


 
Dual XD7500 60 Shipped

As you can see from the pics it was still wrapped in plastic so im assuming this was new, but i tested it anyway, unit looks perfect and works perfect.

comes with harness

339400900.jpg


339400904.jpg


339400909.jpg


339400912.jpg


 
The rest of this stuff i havent been able to test yet, let me know if you are interested in something and ill go ahead and test it. These prices are working prices, i wont except money until they have been tested.

Visonik 2 Channel Amp VB210PKG

looks to be in decent condition. Has sticker on it.

35 Shipped

339449253.jpg


Sony XM-754HX Amp - 45 Shipped

needs to be cleaned but is in decent condition.

Output Power at 14.4V (20Hz ∼ 20kHz):

.High Current Mode:

4 x 35W @ 4 ohms (0.04% THD)

4 x 50W @ 2 ohms (0.1% THD)

2 x 100W @ 4 ohms bridged (0.1% THD)

1 ohm stereo / 2 ohms bridged stable

.High Voltage Mode:

4 x 75W @ 4 ohms (0.04% THD)

4 x 100W @ 2 ohms (0.1% THD)

2 x 200W @ 4 ohms bridged (0.1% THD)

THD: ≤0.005% (1kHz, 4 ohms)

Freq. Response: 5Hz ∼ 50Khz (+.05/-.5 dB)

Fuse: 40A

Dimensions: 12.6" x 10.25" x 2" (32cm x 25.8cm x 5cm)

Weight: 7.7 lbs. (3.5 kg.)

339449267.jpg


Jensen XA-1120 - 20 Shipped

Good condition, missing some screws for the wires, and someone decided to use regular screws on a couple of them, shouldnt effect performance however.

339449257.jpg


Lanzar Vibe 250

60 Shipped

Good used condition.

339449242.jpg


340020686.jpg


340020688.jpg


 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

How I would approach it is install your new amplifier and start using it. Install a voltage gauge and if you see your voltage lowering then add...
4
526
Additinally, no need to reference "max" anything as those specs are useless. Most of know how to look at specs for a given speaker, amp, HU, etc...
2
598
Hello all. Used to come on these forum quite a bit. I used to compete in IASCA MECA etc. and placed 1st 2x with this setup. Anyway this is my baby...
0
887
You don't need two amps. The speakers come with crossovers to help protect the tweeters.
14
1K
Perhaps you changed something without mentioning it here? Maybe a loose turn on line? I dunno man...but we'll take it. Hopefully it keeps working. 👍
16
2K

About this thread

2002XLT

5,000+ posts
Thats right bishes...
Thread starter
2002XLT
Joined
Location
H-Town, TX
Start date
Participants
Who Replied
Replies
47
Views
2,364
Last reply date
Last reply from
captaincheesey
Screenshot 2024-05-31 182935.png

Doxquzme

    Jun 15, 2024
  • 0
  • 0
Screenshot 2024-05-31 182324.png

Doxquzme

    Jun 15, 2024
  • 0
  • 0

New threads

Top