Sold FS: Fusion 2500, DD1508 in ABC box, DD 5.25's

[BASS_WARRIOR 10+ year member]

1. Fusion nv2500.1

its in perfect working condition and good physical condition. 10/10 mechanical 8/10 physical. Comes with Bass knob.

Specs:

Rated by Fusion @ 12v-

825 Watts RMS x 1 Channel @ 4 Ohms and 1% THD+N

1310 Watts RMS x 1 Channel @ 2 Ohms and 1% THD+N

1790 Watts RMS x 1 Channel @ 1 Ohms and 1% THD+N

Many people have tested these to do well over 2000 at 14.4v, and I've seen then ran under 1 ohm:

it was a place named landis tech. they are in north carolina and they are the repair center for rockford fosgate's amps and they repair any brand as well.i had them fix an old rf power 1100a2 a few years back and they sent it with a new birthsheet.

it just cost me shipping both ways and they tested the fusion, mtx81000d, and mtx6500d that i sent them.

at 14.4v the fusion tested 2116rms @ 1ohms

at 14.4v the 81000d tested 1555rms @ 2ohms

at 14.4v the 6500d tested 803rms @ 2ohms

i didnt have them test the fusion at .5ohms but it will run at .5 daily with a good electrical system.

we bench tested the amp at 1 ohm, @ 12.5 volts. Amp was putting out 2235. I know I have ran this amp in my daily at .33 for about 3 months last fall until I pulled everything out, and it never kicked into protect, barely drew any power off my electrical system and was just a solid amp the whole time. Great amplifier!

$275 Shipped OBO

2. DD1508-T in an ABC Box

You guys all know the 1508, its single 4 coil, plain cap. It was bought from an authorized dealer and used for about a week. I have the original box and everything.

$150+ shipping for the sub and box. $120 shipped for just the sub.

3. DD CX5.2

These are brand new and still in the original box. They are beefy as hell!

Specs:http://www.ddaudio.com/dd/caraudio/DD_components_DDCX5_2.asp?series=CX

$60 shipped

Click to read more...

 

[BFeezy 10+ year member]

give 260 shipped for the fusion?

 

[BASS_WARRIOR 10+ year member]

PM sent DerDer

 

[BASS_WARRIOR 10+ year member]

Bump it

 

[BASS_WARRIOR 10+ year member]

bumpity

 

[BASS_WARRIOR 10+ year member]

ttt

 

[BASS_WARRIOR 10+ year member]

after work bump

 

[aanyy 10+ year member]

Can this amp be strapped??

 

[DonH 5,000+ posts]

Can this amp be strapped??

yeah i think so....

two strapped would be a massive power house! just one of these is a tank!.... shoot my 2000.1 is a tank! never gets hot!

bump for an AWESOME! I MEAN AWESOME AMP!

 

[aanyy 10+ year member]

yeah i think so....
two strapped would be a massive power house! just one of these is a tank!.... shoot my 2000.1 is a tank! never gets hot!

bump for an AWESOME! I MEAN AWESOME AMP!

The reason I asked, because I have one running at .5

I would like to have another one,to push my audiopulse axis

I didn't see a master / slave switch on it.

 

[DonH 5,000+ posts]

The reason I asked, because I have one running at .5 I would like to have another one,to push my audiopulse axis

I didn't see a master / slave switch on it.

hmmmm not sure about that then.... op is it?

 

[BASS_WARRIOR 10+ year member]

hmmmm not sure about that then.... op is it?

I don't believe they are. I can't find anywhere saying they are.

 

[DonH 5,000+ posts]

I don't believe they are. I can't find anywhere saying they are.

me either! im searching the interwebz so i dont think they are //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif its to bad would be a great deal of power for the price IMO

 

[BASS_WARRIOR 10+ year member]

bump

 

[BASS_WARRIOR 10+ year member]

ttt