I have this 6 channel amp for sale. It is a solid clean sounding amp. Has to be the best sounding piece of machinery I've ever heard. I don't have to explain much if you know what this amp is capable of. Hate to let it go but selling due to some money problems. As you can see in the pics, only problems with it is there are scratches on top of the amp because of the previous owner and the plexiglass on top of the crossover controls is cracked. Other than that it is perfect. I have babied it for the moautn of time I've owned it. If you don't mind the appearance, than it will work out very good for a active setup or something. Let me state that is amp is very big. Almost 2 feet in length. Retailed for $1199, goes on Epay for $550. Asking $300 + shipping.
Specs:
* D7 Series 6-Channel Amplifier
* Power Handling:
o 4 Ohms: 50 watts x 6 chan.
o 2 Ohms: 100 watts x 6 chan.
o 4 Ohms Bridged: 200 watts x 3 chan.
* Symmetrical Topology, Fully Regulated, Triple-Split-Rail Power Supply
* Isolated Input Section Utilizing "Quasi-Differential" Instrumentation Amplifier Technology
* Third-Order 18dB/Octave Butterworth Crossover Topology
* Wide Bandwidth/Low Distortion Symmetrical Gain Output Stage
* Gold Plated Copper Circuit Board
* High Efficiency Forced-Air Cooling System
* Massive 3-Piece Proprietary Heatsink
* Solid Copper High-Current Power Distribution Busbars
* S/N Ratio: 102 dB
* Frequency Response: 3 Hz - 50 kHz
* Dimensions: 22-3/4"L x 10-5/8"W x 3"H
Amplifier Specifications:
* Number of Channels: 6
* RMS Power (4 ohms): 50 watts x 6 chan.
* RMS Power (2 ohms): 100 watts x 6 chan.
* RMS Power (1 ohm): Not Stable
* Bridged RMS Power: 200 watts x 3 chan.
* Peak Power Output: N/A
* Min. Impedance Unbridged: 2 ohms
* Min. Impedance Bridged: 4 ohms
* THD @ Rated RMS Power: 0.02%
* Speaker Level Inputs: N/A
* Amp Preamp Outputs: N/A
* Built-in Crossover: Third-Order Butterworth
* High-Pass Crossover: N/A
* Low-Pass Crossover: N/A
* Subsonic Filter: N/A
* Signal-to-Noise Ratio: 102 dB
* Channel Separation: N/A
* Bass Boost: N/A
* Bass/Gain Remote: N/A
* Fan Cooled: N/A
* Fuse Rating: 100A x 1
Pics:
Specs:
* D7 Series 6-Channel Amplifier
* Power Handling:
o 4 Ohms: 50 watts x 6 chan.
o 2 Ohms: 100 watts x 6 chan.
o 4 Ohms Bridged: 200 watts x 3 chan.
* Symmetrical Topology, Fully Regulated, Triple-Split-Rail Power Supply
* Isolated Input Section Utilizing "Quasi-Differential" Instrumentation Amplifier Technology
* Third-Order 18dB/Octave Butterworth Crossover Topology
* Wide Bandwidth/Low Distortion Symmetrical Gain Output Stage
* Gold Plated Copper Circuit Board
* High Efficiency Forced-Air Cooling System
* Massive 3-Piece Proprietary Heatsink
* Solid Copper High-Current Power Distribution Busbars
* S/N Ratio: 102 dB
* Frequency Response: 3 Hz - 50 kHz
* Dimensions: 22-3/4"L x 10-5/8"W x 3"H
Amplifier Specifications:
* Number of Channels: 6
* RMS Power (4 ohms): 50 watts x 6 chan.
* RMS Power (2 ohms): 100 watts x 6 chan.
* RMS Power (1 ohm): Not Stable
* Bridged RMS Power: 200 watts x 3 chan.
* Peak Power Output: N/A
* Min. Impedance Unbridged: 2 ohms
* Min. Impedance Bridged: 4 ohms
* THD @ Rated RMS Power: 0.02%
* Speaker Level Inputs: N/A
* Amp Preamp Outputs: N/A
* Built-in Crossover: Third-Order Butterworth
* High-Pass Crossover: N/A
* Low-Pass Crossover: N/A
* Subsonic Filter: N/A
* Signal-to-Noise Ratio: 102 dB
* Channel Separation: N/A
* Bass Boost: N/A
* Bass/Gain Remote: N/A
* Fan Cooled: N/A
* Fuse Rating: 100A x 1
Pics:
