Sold FS; boston acoustic pro60 components

[galacticmonkey 5,000+ posts]

Make/Model:

boston acoustic pro60

Specs:

Boston Acoustics - Mobile Audio - Products

Condition/Description/Other Information:

mids and tweets play PERFECT. nothing wrong there.

what IS wrong, though, is this:

one of the crossovers (happens to be the one in my drivers door) had a component come un-soldered. i soldered it back together, tested it, it worked fine, and then put it back in my car, which its ziptied very snug on the inside of my door panel. well it worked til i shut my door, and i guess that made it come loose. if you put it under a set or in a kick panel, where you wont be slamming the door shut every day, it will be fine. before sale, i can solder it back together and test it for you. but thats the story on that.

2nd thing is- i dont have the part to mount the tweets on the mids to make they like coaxiles.

3rd- the outside of the tweeter grilles look a little jacked up, i went to town on them with some plyers LOL. theyre not bad, but i wouldnt mount them like on a pillar where they'd be seen. if behind a stock tweeter grille or something, you're fine. i had a difficult time getting the tweets out of the coax mounting piece, so i forced it out lol (hence the reason the pieces for the coaxial mounts are no longer with us )

Price (with paypal fees included):

150 OBO, no lowballs please. Plus shipping.

Contact Information:

ufvj217 = AIM

ufvj217@tampabay.rr.com = email

Shipping Information

ups, PM, email, AIM me your zip code, and ill get a shipping quote

Pics:

this can be fixed (or run active )

This is a sale for a friend, pimpedout97x, but he was banned so Im putting this up for him. Please dont PM me with offers, use the contact information in the post to reach him.

Thanks.

Click to read more...

 

[ufvj2172]

bump before bed

 

[ufvj2172]

bUmP

 

[jluv 10+ year member]

oh.
naw i dont have that, im sure u can still send 180-200w rms to each mid, and get like a little 35-50w amp for the tweets, not positive yet.

Separately, the mids are 3 ohm and the tweets are 8 ohm. I feed my mids with an amp that does 150w each at 4 ohm, so I estimate they are getting around 225w each being 3 ohm. They do very well set at 63hz and up and played LOUD. For the tweets, I have them on two channels of a 300/4, getting what would normally be 75w each, but being 8 ohm they are getting around 38w each. They absolutely scream and don't need any more power than that, I assure you.

Wonderful set. I crank mine often and they take it with gusto. I have been very, very pleased with them. Good luck with your sale.

 

[ufvj2172]

thanks for the info! //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif