FS: Belva BB5000D

[Austinw88]

Item(s) for Sale:

Belva BB5000D

BB Series Monoblock Class D Car Amplifier

RMS Power Rating:

4 ohms: 1200 watts x 1 chan.

2 ohms: 1800 watts x 1 chan.

1 ohm: 3000 watts x 1 chan.

Max power output: 5000 watts x 1 chan.

Pulse Width Modulated MOSFET power supply

Wired remote bass level control included

LED power (green) and protect (red) indicators

Variable Bass Boost (0 to +12 dB bass boost adjustable between 30-80 Hz)

Preamp RCA outputs to daisy chain multiple amps

3-way protection circuitry (thermal, overload, and speaker short protection)

Heavy duty aluminum alloy heat-sink

Input sensitivity:

Low level: 100mV-6mV

Variable low-pass filter (40-180 Hz, 12 dB/octave)

Subsonic filter (12 dB variable from 20Hz - 50 Hz)

Frequency response: 20-30,000 Hz

200-240 Amp in-line fuse required, see our selection of recommended fuse holders

Depending on operating impedance, 1/0 or 4 gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.

Dimensions: 20-3/8"W x 8-1/4"D x 2-1/4"H

Belva BB5000D 3000W RMS BB Series Class D Monoblock Car Amplifier

Item(s) Description/Condition:

Great condition but is missing 1 set screw for speaker terminal

I have the og box, manual and bass knob

Price:

225 Shipped

Shipping and Miscellaneous Item Information:

on me

Item Pictures:











(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).

Click to read more...

 

[Jeffdachef 5,000+ posts]

did you actually clamp the amp?

yes we did, but it was with a cheap ebay clamp meter so it most likely is not that accurate. On my vehicle's electricals we got 1883 rising to 2.12 ohms with voltage drop to 14.2. Waves checked out good on the DS nano.

 

[shauncox26]

So they pretty much snake rated anyone got a clamp at almost 1ohm.

 

[Jeffdachef 5,000+ posts]

you can try to look for clamps of the RE audio amp that this was rebadged after. I remember it being not as efficient at lower ohms drop so for sure this aint gonna do anywhere near 3k.

 

[bgowdy 5,000+ posts]

yes we did, but it was with a cheap ebay clamp meter so it most likely is not that accurate. On my vehicle's electricals we got 1883 rising to 2.12 ohms with voltage drop to 14.2. Waves checked out good on the DS nano.

You know idk how accurate that is but thats pretty good numbers, think about it. The amp is only rated 1800rms @ 2ohm, and at 2.12 it did 1883.... hm even if it was at 14.2v. The RE amp is rated 2500 @ 1ohm. so ive said since ive seen it that i say it should about 2500

 

[bgowdy 5,000+ posts]

@TaylorFade; did you ever clamp one of these?

 

[shauncox26]

If not he should. I want to hop on this so bad, just to see what it's about. Wife will kill me though if I buy anything else.

 

[bgowdy 5,000+ posts]

If not he should. I want to hop on this so bad, just to see what it's about. Wife will kill me though if I buy anything else.

ive seen some talk but no real "reliable" clamp tests. i mean for this price even if it only did 2k that would be a good deal. But again the guy above from his test got 1883 @ 2.12ohms. The amps only rated 1800 @ 2ohm. But he said he dont know how accurate it is because its a EBAY clamp meter

 

[Jeffdachef 5,000+ posts]

yup, unless its fluke clamp or an amp dyno, i dont trust those numbers myself lol. It did outperform my hifonics by a bit though. If op wants i'll trade my brx2400.1D for it //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[shauncox26]

Yup but for this price I can strap two shark audio 2.5ks for more power. Decisions decisions!

 

[bgowdy 5,000+ posts]

yup, unless its fluke clamp or an amp dyno, i dont trust those numbers myself lol. It did outperform my hifonics by a bit though. If op wants i'll trade my brx2400.1D for it //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

im looking for a decent 3k amp myself, i have a apsm2k and i was going to get another strap and dial the gain down to like 3k between the 2 on 2 Obsidian 18 v2 d2's. Im a cheap @ss lol, so i dont want to over spend. I know the apsm's wont do rated clean but i think they will do about 3k between the 2. But if i could trade it for something plus cash i would tho

 

---------- Post added at 10:56 PM ---------- Previous post was at 10:55 PM ----------

 

Yup but for this price I can strap two shark audio 2.5ks for more power. Decisions decisions!

watch tho, those amps wont do the rated power clean, they WILL MAKE ALOT, but clean is another story, im in the same boat with my apsm

 

[Austinw88]

trade for at 800.1 with knob plus cash?

Really don't have any use for a 800.1 man, Thanks for the offer tho!

 

[Austinw88]

yup, unless its fluke clamp or an amp dyno, i dont trust those numbers myself lol. It did outperform my hifonics by a bit though. If op wants i'll trade my brx2400.1D for it //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

Gonna have to pass on the brx man, love them amps but really need the cash, trades would really have to excite me to make it happen ..

 

[bgowdy 5,000+ posts]

Really don't have any use for a 800.1 man, Thanks for the offer tho!

what are you looking for trade wise anyway?

 

[Austinw88]

what are you looking for trade wise anyway?

pm sent..

 

[Spooney 10+ year member]

pm sent..

Curious about trades too.