FS: Alpine PDX-4.100 - $250 OBO
Shipped in Continental 48 states.
This amplifier has been tested on the bench to operate normally but there is NO FURTHER WARRANTY IMPLIED OR EXPRESSED beyond that this amp will work when you receive it.
NO TRADES - Do not PM me with "What is the lowest you will take" - MAKE AN OFFER if you have one.
CEA-2006 Power Ratings
* CEA-2006 Power Rating: (4/2 I?@14.4V Ƈ%THD+N), S/N 76dBA (Ref. 1W into 4 I?): 100w x 4
RMS Power Ratings
* Per channel into 4 Ohms: (@14.4V Ƈ%THD+N, 20Hz - 20kHz) 100W x 4
* Per channel into 2 Ohms: (@14.4V Ƈ%THD+N, 20Hz - 20kHz) 100W x 4
* Bridged 4 Ohms: Bridged into 4I? (Ƈ%THD+N) 200w x 2
Sound Tuning
* Crossover: Variable, 30-400Hz (-12dB / oct ), Low-Pass/High-Pass /OFF Selectable
Dimensions
* Heat Sink (WxHxD) mm: 257mm x 192mm x 62mm
* Heat Sink (WxHxD) in: 10-1/8'' x 7-9/16'' x 2-7/16''
General
* Power Requirements: 14.4V DC (11V to 16V)
* Input Sensitivity: 0.2V to 4.0V (For Rated Power)
* Frequency Response: 20Hz - 20kHz (+0, -1dB)
* Speaker Impedance: 4 or 2 I?
* Signal to Noise: CEA 2006 S/N Ratio (IHF A Weighted, Reference: 1W into 4I?) 76 dBA
Shipped in Continental 48 states.
This amplifier has been tested on the bench to operate normally but there is NO FURTHER WARRANTY IMPLIED OR EXPRESSED beyond that this amp will work when you receive it.
NO TRADES - Do not PM me with "What is the lowest you will take" - MAKE AN OFFER if you have one.
CEA-2006 Power Ratings
* CEA-2006 Power Rating: (4/2 I?@14.4V Ƈ%THD+N), S/N 76dBA (Ref. 1W into 4 I?): 100w x 4
RMS Power Ratings
* Per channel into 4 Ohms: (@14.4V Ƈ%THD+N, 20Hz - 20kHz) 100W x 4
* Per channel into 2 Ohms: (@14.4V Ƈ%THD+N, 20Hz - 20kHz) 100W x 4
* Bridged 4 Ohms: Bridged into 4I? (Ƈ%THD+N) 200w x 2
Sound Tuning
* Crossover: Variable, 30-400Hz (-12dB / oct ), Low-Pass/High-Pass /OFF Selectable
Dimensions
* Heat Sink (WxHxD) mm: 257mm x 192mm x 62mm
* Heat Sink (WxHxD) in: 10-1/8'' x 7-9/16'' x 2-7/16''
General
* Power Requirements: 14.4V DC (11V to 16V)
* Input Sensitivity: 0.2V to 4.0V (For Rated Power)
* Frequency Response: 20Hz - 20kHz (+0, -1dB)
* Speaker Impedance: 4 or 2 I?
* Signal to Noise: CEA 2006 S/N Ratio (IHF A Weighted, Reference: 1W into 4I?) 76 dBA
