im selling an Alpine MRD-M605 amp, its in great condition, i have included some links to pics, $200shipped obo, local pickup in socal, check my ebay feedback, ebay id: majinbatusaix, get at me on aim for faster replies@ alexoislikewhoa
http://i5.photobucket.com/albums/y192/majinbatusaix/pict0445.jpg
http://i5.photobucket.com/albums/y192/majinbatusaix/PICT0443.jpg
SPECIFICATIONS
CEA-2006 Power Rating
* • CEA-2006 Power Rating (4Ohm@14.4V = 1%THD+N), S/N 65dBA (Ref. 1W into 4Ohm): 400W x 1
RMS Power (at 14.4V,20Hz-200Hz)
* • Per channel into 4 ohms : 400W x 1
* • Per channel into 2 ohms : 600W x 1
Bass Engine®
* • Crossover Type : 24dB/Octave Low Pass - Digital
* • Low Pass Crossover Frequency (Selectable) : 30Hz - 200Hz (1/6 oct. Steps or Off)
* • Subsonic Filter Range : 15Hz - 50Hz (5Hz Steps) or OFF
* • Subwoofer Phase Control : Normal (0°) or Reverse (180°)
General
* • Frequency Reponse : 20Hz-200Hz (±1dB)
* • Heat Sink (WxHxD)in : 7-31/64" x 2-5/16" x 8-11/16"
* • Heat Sink (WxHxD)mm : 190mm x 60mm x 220mm
* • Input Impedance : 100k Ohm
* • Input Sensitivity (for rated power) : 0.1V to 8.0V
* • Signal to Noise (S/N) : 90dBA (referenced to rated power)
* • Speaker Impedance : 4 or 2 ohms (Mono)
* • Weight : 3.9kg (9lbs. 5oz.)
http://i5.photobucket.com/albums/y192/majinbatusaix/pict0445.jpg
http://i5.photobucket.com/albums/y192/majinbatusaix/PICT0443.jpg
SPECIFICATIONS
CEA-2006 Power Rating
* • CEA-2006 Power Rating (4Ohm@14.4V = 1%THD+N), S/N 65dBA (Ref. 1W into 4Ohm): 400W x 1
RMS Power (at 14.4V,20Hz-200Hz)
* • Per channel into 4 ohms : 400W x 1
* • Per channel into 2 ohms : 600W x 1
Bass Engine®
* • Crossover Type : 24dB/Octave Low Pass - Digital
* • Low Pass Crossover Frequency (Selectable) : 30Hz - 200Hz (1/6 oct. Steps or Off)
* • Subsonic Filter Range : 15Hz - 50Hz (5Hz Steps) or OFF
* • Subwoofer Phase Control : Normal (0°) or Reverse (180°)
General
* • Frequency Reponse : 20Hz-200Hz (±1dB)
* • Heat Sink (WxHxD)in : 7-31/64" x 2-5/16" x 8-11/16"
* • Heat Sink (WxHxD)mm : 190mm x 60mm x 220mm
* • Input Impedance : 100k Ohm
* • Input Sensitivity (for rated power) : 0.1V to 8.0V
* • Signal to Noise (S/N) : 90dBA (referenced to rated power)
* • Speaker Impedance : 4 or 2 ohms (Mono)
* • Weight : 3.9kg (9lbs. 5oz.)
