j3bus2k3 5,000+ posts
Si vis pacem, para bellum
This is everything I've got left from my car audio collection so here it all is...
Up first, a ****-ton of ring terminals. I've got over 350 1/0 ring terminals, and 40 #4. Brazed copper with a 1/2" opening.
$0.50 apiece for the 1/0, $0.35 for teh #4; shipping is $7 anywhere in the 48
---------------------------------
Second, a set of MB Quart RCE216 comps. Really loved the way these sounded. Come in the original box with instructions, most mounting hardware and even a set of rings if you want them.
$80+shipping
---------------------------------
Up next is a 12" older model type-r. The surround tore from the cone but a $5 bottle of CA Glue fixed that. Sub runs 100% fine with the repair; but where the cone meets the surround, looks a little shabby from the rip.
$50+ship
---------------------------------
Nextly, I've got a Coustic XM7 Active proscessor. Will allow for 7 channels of active processing. Fairly rare but a quality piece for sure...
$100 + ship
---------------------------------
And lastly, my baby, a 12" TC3000 based custom sub. Basket changes colors based on light, sometimes blue, sometimes a dark purple. D2 Copper Coils, double stiff spiders with a black, logoless concave cone. Practically BNIB, just dont have a box; never seen power. More pics available...
$250+shipping
-------------------------------
And lastly, lastly, my project room/ht sub. Its a tangband 8" off a dayton 100W sub. It sounds pretty good but is more geared for music than HT use; at lower notes, you can detect alittle port noise. Box is .8ft^3 tuned at 30hz. Will cover for customer if wanted.
$90+shipping
------------------------------
AIM contact info is in my sig, as well as references.
Thanks guys,
-Scott
Up first, a ****-ton of ring terminals. I've got over 350 1/0 ring terminals, and 40 #4. Brazed copper with a 1/2" opening.
$0.50 apiece for the 1/0, $0.35 for teh #4; shipping is $7 anywhere in the 48
---------------------------------
Second, a set of MB Quart RCE216 comps. Really loved the way these sounded. Come in the original box with instructions, most mounting hardware and even a set of rings if you want them.
$80+shipping
---------------------------------
Up next is a 12" older model type-r. The surround tore from the cone but a $5 bottle of CA Glue fixed that. Sub runs 100% fine with the repair; but where the cone meets the surround, looks a little shabby from the rip.
$50+ship
---------------------------------
Nextly, I've got a Coustic XM7 Active proscessor. Will allow for 7 channels of active processing. Fairly rare but a quality piece for sure...
$100 + ship
---------------------------------
And lastly, my baby, a 12" TC3000 based custom sub. Basket changes colors based on light, sometimes blue, sometimes a dark purple. D2 Copper Coils, double stiff spiders with a black, logoless concave cone. Practically BNIB, just dont have a box; never seen power. More pics available...
$250+shipping
-------------------------------
And lastly, lastly, my project room/ht sub. Its a tangband 8" off a dayton 100W sub. It sounds pretty good but is more geared for music than HT use; at lower notes, you can detect alittle port noise. Box is .8ft^3 tuned at 30hz. Will cover for customer if wanted.
$90+shipping
------------------------------
AIM contact info is in my sig, as well as references.
Thanks guys,
-Scott