12" atomic energy subs svc 4 ohm
Polymica cone body with a outer reinforced ring to prevent cone flex Revc 3.80 ohms
Butyl rubber surround, heavy duty and forever lasting Fo 29.40 Hz
Uni-body gasket and surround Sd 0.055 sqM
vented cone for extra heat dissipation Bl 17.67 TM
2 inch high temp aluminum voice coil SPLo 88 dB
extended, machined cut one piece back plate Xmax 10 mm
1 inch thick 50 oz high energy magnet Dvc 50 mm
integrated lead wire on spider prevent short circuit and melt down
concave dust cap design Qms 5.02 m.q.
low carbon front and back plate Qes 0.417 e.q.
black anodized pole piece Qts 0.385 totQ
Vas 68 liters
Cms 158 uM-N
last season we were hitting 141db on the termlab, in a sealed box in the trunk of a hyundai accent off of 400watts total. great subs. great condition
$100 shipped for the pair
email slurp23@hotmail.com for pics
Polymica cone body with a outer reinforced ring to prevent cone flex Revc 3.80 ohms
Butyl rubber surround, heavy duty and forever lasting Fo 29.40 Hz
Uni-body gasket and surround Sd 0.055 sqM
vented cone for extra heat dissipation Bl 17.67 TM
2 inch high temp aluminum voice coil SPLo 88 dB
extended, machined cut one piece back plate Xmax 10 mm
1 inch thick 50 oz high energy magnet Dvc 50 mm
integrated lead wire on spider prevent short circuit and melt down
concave dust cap design Qms 5.02 m.q.
low carbon front and back plate Qes 0.417 e.q.
black anodized pole piece Qts 0.385 totQ
Vas 68 liters
Cms 158 uM-N
last season we were hitting 141db on the termlab, in a sealed box in the trunk of a hyundai accent off of 400watts total. great subs. great condition
$100 shipped for the pair
email slurp23@hotmail.com for pics