(Pics are at bottom of post)
It's time for me to sell off the extra car audio stuff I have. It's just sitting here and I have no use for any of it at the moment except for an IDQ15 I'm gonna use in an HT setup.
First up, two JL 10W3v1's. Dual 4 VC config. 14mm xmax. Fs of 28.8Hz I believe. Mechanically in perfect condition, had them on 350wrms each at one point. I know a few people that have had this model sub that have given them 600wrms. Pretty well known sub, I don't think I need to talk to much about it. Surround and cone are perfect, cosmetically the only thing wrong with them is the "seperating trim ring" condition that you see on a lot of these older subs.
The box is free if you want it, dimensions are 32Wx11Hx13D.
Price: $100->90+shipping
--------------------------------------------------------------------------------------
Second, the 12" Sound Splinter RL-p. D2 VC. Mint condition throughout, I've had it since like July '06 I believe, bought new. Had it on 800wrms @ 4ohms from the Soundstream amp I'm still using. Love the sub, but I've upgraded to a Fi Q15 w/BP and I'm finally using the amp to its full potential.
Price: $180+shipping
--------------------------------------------------------------------------------------
Third, an Autotek SX-4160. Four channel amp.
100 Watts X 4 Channels @ 4 Ohms
150 Watts X 4 Channels @ 2 Ohms
320 Watts X 2 Channels @ 4 Ohms Bridged
Mechanically the amp is 9/10, I can't call it a 10/10 because everything works fine except the high pass filter knobs are gone (!). Don't know how that happened cause that's how I got the amp (got it used, I'm the second owner), but it shouldn't matter cause if you have a HU (which I'm guessing you do if you have a system) you can just set the HPF on that, right?
Price: $85->70+shipping
--------------------------------------------------------------------------------------
Finally, a Kenwood KAC-729S. 10/10 mechanically, 7/10 cosmetically cause it has minor scratches on it. I would have taken pics of it today along with the others but I can't find it, thought it was under the bed with the other stuff but it isn't. Will post pics when I find it.
$75->$55+shipping
Let me know if I'm out of line with my asking prices, I don't think I am but than I don't follow the used market that well to know exactly how much these things are worth.
Please don't PM me with an offer half of my asking price, I'm not in a dire financial situation, I'm just trying to sell off good parts to people that can use them instead of having them collect dust.
It's time for me to sell off the extra car audio stuff I have. It's just sitting here and I have no use for any of it at the moment except for an IDQ15 I'm gonna use in an HT setup.
First up, two JL 10W3v1's. Dual 4 VC config. 14mm xmax. Fs of 28.8Hz I believe. Mechanically in perfect condition, had them on 350wrms each at one point. I know a few people that have had this model sub that have given them 600wrms. Pretty well known sub, I don't think I need to talk to much about it. Surround and cone are perfect, cosmetically the only thing wrong with them is the "seperating trim ring" condition that you see on a lot of these older subs.
The box is free if you want it, dimensions are 32Wx11Hx13D.
Price: $100->90+shipping
--------------------------------------------------------------------------------------
Second, the 12" Sound Splinter RL-p. D2 VC. Mint condition throughout, I've had it since like July '06 I believe, bought new. Had it on 800wrms @ 4ohms from the Soundstream amp I'm still using. Love the sub, but I've upgraded to a Fi Q15 w/BP and I'm finally using the amp to its full potential.
Price: $180+shipping
--------------------------------------------------------------------------------------
Third, an Autotek SX-4160. Four channel amp.
100 Watts X 4 Channels @ 4 Ohms
150 Watts X 4 Channels @ 2 Ohms
320 Watts X 2 Channels @ 4 Ohms Bridged
Mechanically the amp is 9/10, I can't call it a 10/10 because everything works fine except the high pass filter knobs are gone (!). Don't know how that happened cause that's how I got the amp (got it used, I'm the second owner), but it shouldn't matter cause if you have a HU (which I'm guessing you do if you have a system) you can just set the HPF on that, right?
Price: $85->70+shipping
--------------------------------------------------------------------------------------
Finally, a Kenwood KAC-729S. 10/10 mechanically, 7/10 cosmetically cause it has minor scratches on it. I would have taken pics of it today along with the others but I can't find it, thought it was under the bed with the other stuff but it isn't. Will post pics when I find it.
$75->$55+shipping
Let me know if I'm out of line with my asking prices, I don't think I am but than I don't follow the used market that well to know exactly how much these things are worth.
Please don't PM me with an offer half of my asking price, I'm not in a dire financial situation, I'm just trying to sell off good parts to people that can use them instead of having them collect dust.
