Immacomputer
10+ year member
Cloud disappear
Well today my friend and I finally got together to get his guitar cabinet up and built. The cabinet will house four 12" Celestion G12Hs sealed. It should be a pretty nice cabinet when we're finished.
He just bought a new dove tail jig and we spent the majority of the time getting it all calibrated and adjusting the router to the correct height.
Here are the pictures:
What the joint looks like:
Flawless:
Greg pounding away at the joint to get it in place:
The top panel going on:
Waiting for it to dry. We put the angle clamps to ensure a right angle while it was drying. We really didn't need to as the joints pretty much set it up pretty **** square:
The joints were beautiful without glue but once we put some glue in there, they became VERY difficult to get all the way in. We got them in with about 1/16" sticking out on two joints and the others were only about 1/32" above. We're going to be working on it tomorrow along with a build for an L7 12". I'll get pictures of that and more of this up then.
He just bought a new dove tail jig and we spent the majority of the time getting it all calibrated and adjusting the router to the correct height.
Here are the pictures:
What the joint looks like:
Flawless:
Greg pounding away at the joint to get it in place:
The top panel going on:
Waiting for it to dry. We put the angle clamps to ensure a right angle while it was drying. We really didn't need to as the joints pretty much set it up pretty **** square:
The joints were beautiful without glue but once we put some glue in there, they became VERY difficult to get all the way in. We got them in with about 1/16" sticking out on two joints and the others were only about 1/32" above. We're going to be working on it tomorrow along with a build for an L7 12". I'll get pictures of that and more of this up then.
