First Time Fiberglassing (Tweeter Pods & Sub Box)

[RoLLaxPhile 10+ year member]

This is gonna be my first fiberglassing project. I read many threads on the is forum and others plus HOW-TO's. I think I pretty much understand how to do it. Now it's time to actually do it. I've made a list of materials that are needed in order to do my project. If there is anything that I need or should get please feel free to chime in, I could use all the help I need before I start.

Supplies

Sails (Tweeter Base)

MDF Speaker Rings (10" 3/4 & 1" 5/8)

Dowel Rods (1/4" & 3/4")

Fleece

Disposable Latex Gloves

US Composites B-440 Polyester Resin w/MKEP Hardener

Gallon of Rage Gold Body Filler

Acetone (For Clean Up)

3yrds 3/4oz Chopped Strand Fiberglass Mat

3yrds DBM 1708 Knytex Biaxial Fiberglass Fabric

Roll of Blue Painter's Tape

Can of WD-40

3M Hi-Strength 90 Spray Adhesive

Tools

3M Respirator

CA Glue

Mixing Cup & Sticks

Disposable Brushes

Sand paper (60/80/220/320/400 grit)

Dremel Tool

Extra

Flat Black Paint

Primer

Charcol carpet

Click to read more...

 

[AVX Mike 10+ year member]

From doing lots of fiberglass work almost daily at my shop I would strongly recomend using CA glue over hot glue. The hot glue has a tendency of letting go when you really don't want it to. CA stays put. If you have any other questions feel free to pm or email me I don't get on here very often.

 

[RoLLaxPhile 10+ year member]

Thanks

Anyone else have input?

 

[RoLLaxPhile 10+ year member]

bump up anyone?

 

[RoLLaxPhile 10+ year member]

ttt