Hey guys. I'm new to the forums here so go easy
Ok, so here's the deal. I own a 2004 Jeep Wrangler Unlimited. These are obviously not meant for superior audio, but being 20 years old, music is something I really enjoy. I finally decided I'd like to ditch the sub par stock audio for some nice aftermarket parts. I'm hoping you guys can answer a few beginner questions for me.
I own this head unit: h ttp://www.crutchfield.com/p_110VM9214B/Jensen-VM9214BT.html?search=vm9214bt&skipvs=T (Sorry for the weird link. I guess new posters can't use them. Just remove the space.)
I guess the power it puts out is not all that great, but I'm on a budget (yes I realize it's an expensive head unit, but I NEED the GPS) so it'll have to do.
I purchased these speakers for the front: h ttp://www.crutchfield.com/p_500SPS410/Alpine-SPS-410.html?search=Alpine+VENDORID500&searchdisplay=Alpine
These for the back: ht tp://www.crutchfield.com/p_130TSA1304/Pioneer-TS-A1304C.html?search=Pioneer+VENDORID130&tp=106
I know the 4" speakers in the front are very small. They aren't ideal, but the Jeep factory speakers are an awkward size that I couldn't find anywhere so I had to settle for these with an adapter plate. The one's in the back are component and I'm hoping I didn't mess up by getting these considering I'm not exactly sure what I'm doing, especially when the word 'crossover' comes into play.
For the most part, they sound OK. The 4's are a little quiet, but they're small so I guess it's expected. I hear there's a 'break in' time for new speakers? I only have roughly 2 hours of play time on them. The only issue I have is the bass they produce is lacking severely, which brings me to my next topic.
I need a subwoofer. What am I looking for? I'm looking for something relatively inexpensive, yet still capable of quality performance. I listen to mostly electronic music (trance, etc.) so I'm not looking for the ignorant loudness that can be heard down the road. I've been looking at this particular subwoofer: ht tp://www.crutchfield.com/p_108BASSLIN/Infinity-BassLink.html?ssi=0&tp=27756
It's relatively cheap and already comes with an amp built in so I figure setup should be pretty easy. What's your opinion on it? I know it's not a $300 Digital Design, but it's about all I can afford. From the reviews, it seems pretty decent. Sounds like it has enough punch to add that extra level to my music. The only thing that worries me is I saw the phrase 'paper cone' in there.
So here comes a list of questions:
-Would I benefit from an amp? I've heard that putting an amp on cheap speakers can make them sound pretty good. I'm not sure if I'm getting the full potential from mine at the moment. I know I could go out and get a 5 channel amp to power my whole setup, granted that's another $350.
-Apparently for component speakers you need a crossover. I don't have one of these and my speakers seem to work fine without it (I could be completely wrong though and sound like an idiot here.)
-Is the onboard amp on that subwoofer mono? AKA it's dedicated to that subwoofer only and nothing else can be hooked up to it.
Sorry for the long read; I broke it up the best I could. Thanks in advance to anyone that helps me out here.
I own this head unit: h ttp://www.crutchfield.com/p_110VM9214B/Jensen-VM9214BT.html?search=vm9214bt&skipvs=T (Sorry for the weird link. I guess new posters can't use them. Just remove the space.)
I guess the power it puts out is not all that great, but I'm on a budget (yes I realize it's an expensive head unit, but I NEED the GPS) so it'll have to do.
I purchased these speakers for the front: h ttp://www.crutchfield.com/p_500SPS410/Alpine-SPS-410.html?search=Alpine+VENDORID500&searchdisplay=Alpine
These for the back: ht tp://www.crutchfield.com/p_130TSA1304/Pioneer-TS-A1304C.html?search=Pioneer+VENDORID130&tp=106
I know the 4" speakers in the front are very small. They aren't ideal, but the Jeep factory speakers are an awkward size that I couldn't find anywhere so I had to settle for these with an adapter plate. The one's in the back are component and I'm hoping I didn't mess up by getting these considering I'm not exactly sure what I'm doing, especially when the word 'crossover' comes into play.
For the most part, they sound OK. The 4's are a little quiet, but they're small so I guess it's expected. I hear there's a 'break in' time for new speakers? I only have roughly 2 hours of play time on them. The only issue I have is the bass they produce is lacking severely, which brings me to my next topic.
I need a subwoofer. What am I looking for? I'm looking for something relatively inexpensive, yet still capable of quality performance. I listen to mostly electronic music (trance, etc.) so I'm not looking for the ignorant loudness that can be heard down the road. I've been looking at this particular subwoofer: ht tp://www.crutchfield.com/p_108BASSLIN/Infinity-BassLink.html?ssi=0&tp=27756
It's relatively cheap and already comes with an amp built in so I figure setup should be pretty easy. What's your opinion on it? I know it's not a $300 Digital Design, but it's about all I can afford. From the reviews, it seems pretty decent. Sounds like it has enough punch to add that extra level to my music. The only thing that worries me is I saw the phrase 'paper cone' in there.
So here comes a list of questions:
-Would I benefit from an amp? I've heard that putting an amp on cheap speakers can make them sound pretty good. I'm not sure if I'm getting the full potential from mine at the moment. I know I could go out and get a 5 channel amp to power my whole setup, granted that's another $350.
-Apparently for component speakers you need a crossover. I don't have one of these and my speakers seem to work fine without it (I could be completely wrong though and sound like an idiot here.)
-Is the onboard amp on that subwoofer mono? AKA it's dedicated to that subwoofer only and nothing else can be hooked up to it.
Sorry for the long read; I broke it up the best I could. Thanks in advance to anyone that helps me out here.
