Finally!!!!

[LetMyBeatPound]

Also selling one system for $190 tomorrow and another 3 subs n box for $65 and probably an amp and wire kit for $50 so if I actually save that money I'll have a nice start toward my H/O Alternator should all the sales go right... I also have a dab rig I got sold ferrules too for $50 since I quit smoking pot n concentrates last April. So things are looking good

 

[Boomin_tahoe 5,000+ posts]

I bought a decent used Craftsman tabe saw and a 200 tooth blade but being 5'x5' sheets and I'm only 5'5" had a lil trouble getting my lines perfectly straight, but I'll C clamp them in and I got a palm sander and a decent sanding block to get everything nice, flat, and square. Nothing is really off more than 16th to few 16ths off so shouldn't take long.. I have a wood plane but idk how well that will work on the ply.

Oh I c. I cut my pieces with a jigsaw because my tablesaw doesn't like huge pieces plus no support. Then I just finished the rough cuts with either the tablesaw or router that I have.

 

[LetMyBeatPound]

I was gonna get a router but I bought a pistol instead lol

 

[ChaseinBass]

Oh I c. I cut my pieces with a jigsaw because my tablesaw doesn't like huge pieces plus no support. Then I just finished the rough cuts with either the tablesaw or router that I have.

Thats how I do it too but I clamp a straight edge to it and use my skill saw and get them reallly close then cut them on table saw and last i use a belt sander to get a perfect fit. I used to have panel saw and man would that come in handy for building boxes, But it takes up a lot of space to only use once or twice a year. Just take your time and enjoy the work and it will show in the end results.

 

[LetMyBeatPound]

Yep, I didn't have any o these tools to start off with I had to buy everything... I use to work construction doing alot of framing and sheet rocking n what not but I lost everything a few years back during an eviction after my mom's passed away and the **** landlord stole everything I owned

 

[LetMyBeatPound]

Just a lil Imgur picture update... I should have the box finished tomorrow and hopefully installed Tuesday morning. Dang this was alot more work than i though!

Getting there slowly, but surely... https://imgur.com/gallery/By7do