fi audio

[fletch_1 10+ year member]

okay im fixon to get 2 fi audio 18 btl fully loaded sub's and they are dual voice 1 and im wonderin what all ways u can wire them too im thinkin about runnin 2 rockford fosgate 3000 's on each so how would i wire them thanks

Click to read more...

 

[iceteebone 5,000+ posts]

1 ohm, or 0.25 ohms

 

[Abel 10+ year member]

better have a healthy elec. system for that much power.

 

[ngsm13 5,000+ posts]

One 3000 on each coil.

Level matched EXACTLY with a DMM.

Which I actually don't recommend since you don't seem very knowledgeable.

nG

 

[fletch_1 10+ year member]

i thought u couldnt wire a sub to 1 ohm with it already bein dvc 1 ohm is there a wiring map anywhere on the internet that shows me how to do it with a dvc 1 ohm

yeah gettin some batteries and a 300 amp alt and maybe big 3 done

 

[pike110 10+ year member]

dual 2 ohm sub can be wired to 1ohm.

 

[9512ds 5,000+ posts]

****ing idiots...

each sub can be wired to .35 or 1.4

the pair could be wired to 2.8, 1.4, .175

 

[pike110 10+ year member]

Those amps are 1ohm stable you need 2 ohm subs.

 

[iceteebone 5,000+ posts]

i thought u couldnt wire a sub to 1 ohm with it already bein dvc 1 ohm is there a wiring map anywhere on the internet that shows me how to do it with a dvc 1 ohm

yeah gettin some batteries and a 300 amp alt and maybe big 3 done

he has a pair of subs //content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif

****ing idiots...
each sub can be wired to .35 or 1.4

the pair could be wired to 2.8, 1.4, .175

how could a dual 1 ohm sub be wired to 1.4 or .35?

 

[9512ds 5,000+ posts]

they are .7 coils

 

[iceteebone 5,000+ posts]

they are .7 coils

oh

the op said dual 1 //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

i'm not in the fi loop //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif

 

[9512ds 5,000+ posts]

oh
the op said dual 1 //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

i'm not in the fi loop //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif

i know they are sold as dual 1s, im just going by what my dmm reads

no blood no foul //content.invisioncic.com/y282845/emoticons/veryhappy.gif.fec4fed33b4a1279cf10bdd45a039dae.gif

 

[theCybe 5,000+ posts]

Which I actually don't recommend since you don't seem very knowledgeable.nG

Agreed, that's a very expensive question to be asking when we're talking about this level of hardware.

Like buying a Ferarri and learning to drive a standard in it.

 

[ngsm13 5,000+ posts]

they are .7 coils

Please don't mention that to these kids.

No need to get them confused with Nominal and DCR right now...

It's gonna happen.

nG

 

[02parkave 5,000+ posts]

judging by your past posts, i would agree with ngsm.... you dont appear to know the first thing about stereo... maybe look at a different set up, something easier...maybe 2 fi q's if you want to stay with fi, and a 30001bd for the pair... do you have any idea what kind of a charging system you would need with 4-30001bd's, and a component amp? (each 30001 is fused at 300 amps and lets say you use an 8004 for treble thta is fused at 150 amps) according to the link i supplied below you would be drawing about 775 amps on average....

http://www.rockfordfosgate.com/scripts/rightnow.cfg/php.exe/enduser/fattach_get.php?p_sid=122skzui&p_tbl=9&p_id=452&p_created=1115933221

i wouldnt recommend this for a first setup (as it sounds it would be for you)