fast Ohm question for 4 8's

[thur5d4yf4n 10+ year member]

4 8's... each is single voice coil at 4 ohms. my amp is 1 ohm stable at 800 watts. each sub is 200 watts. what is my final impedance with all 4 subs on my amp and how would I wire these together?

Click to read more...

 

[lilmaniac2 5,000+ posts]

parallel them all ( connect all pos togeter and all neg together ) 1 ohm final load //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[NJTStang11 10+ year member]

4 8's... each is single voice coil at 4 ohms. my amp is 1 ohm stable at 800 watts. each sub is 200 watts. what is my final impedance with all 4 subs on my amp and how would I wire these together?

SVC 4ohm can be wired to 1ohm.

Assuming each sub is 200rms (not max power) looks like it should work perfectly.

Check either the wiring forum/JL Audio site/Rockford Fosgate site for diagrams of how to wire these together properly. Good luck.

 

[thur5d4yf4n 10+ year member]

ooooo perfect. just in case anybody would know anything about these 8's... http://www.partsexpress.com/pe/showdetl.cfm?&Partnumber=293-260

they any good? for a daily beater ported im hoping low 30's?

 

[jmrunz 10+ year member]

if you are wanting higher spl but conserve space the 4 8" will give more surfae area than 1 12" therefore giving you more spl at the same power.

 

[ultimate157 5,000+ posts]

if you are wanting higher spl but conserve space the 4 8" will give more surfae area than 1 12" therefore giving you more spl at the same power.

No.